drifter001 Posted May 4, 2022 Report Posted May 4, 2022 Those of you that have gone G5 and beyond,, what gave you done about the PC system? Can it be removed. We’re installing dual GI275 and wanted to remove the vacuum system but seems like that’s what runs PC Quote
Mooneymite Posted May 4, 2022 Report Posted May 4, 2022 2 hours ago, drifter001 said: ... seems like that’s what runs PC Yep. Quote
drifter001 Posted May 4, 2022 Author Report Posted May 4, 2022 6 minutes ago, Mooneymite said: Yep. 7 minutes ago, Mooneymite said: Yep. It’s inop to one side. Do you know if we were to just keep it inop, if the vacuum pump runs the step? I don’t have a crank for it Quote
Schinderhannes Posted May 4, 2022 Report Posted May 4, 2022 I have an Aspen EFD with an electric back-up attitude indicator and the vacuum system solely runs the positive control. 1 Quote
Bob R Posted May 5, 2022 Report Posted May 5, 2022 8 hours ago, drifter001 said: Those of you that have gone G5 and beyond,, what gave you done about the PC system? Can it be removed. We’re installing dual GI275 and wanted to remove the vacuum system but seems like that’s what runs PC I have dual G5’s and a good working PC. I don’t see the need to remove the PC until I install an autopilot. 1 Quote
Shadrach Posted May 5, 2022 Report Posted May 5, 2022 5 hours ago, drifter001 said: Vacuum pump runs the step. PC is an easy system to sort out for someone that is familiar. The hoses behind panel need to be replaced every 7 years or so. Used boots are available. Quote
Bob R Posted May 5, 2022 Report Posted May 5, 2022 20 minutes ago, Shadrach said: Vacuum pump runs the step. PC is an easy system to sort out for someone that is familiar. The hoses behind panel need to be replaced every 7 years or so. Used boots are available. Yep, been through all that including the poly lines out to the servos in the wings thanks to a mouse. Pretty easy fix though. All of the poly flex tubing and fittings are all available from Parker using the original part numbers from Brittian. Have them somewhere if you need them. I just told the local supplier out here in sacramento it was for a boat. 1 Quote
Bob R Posted May 5, 2022 Report Posted May 5, 2022 5 hours ago, Schinderhannes said: I have an Aspen EFD with an electric back-up attitude indicator and the vacuum system solely runs the positive control. Mine runs the TC100 (along with Electric) and the PC system. I could remove the TC100 since I have G5's. I already have kit for the Vacuum Pump removal but will probably wait till I do the AP. Nice to have the wing leveler for a bit of piece of mind in IFR. Quote
carusoam Posted May 5, 2022 Report Posted May 5, 2022 If you have dough…. Vac is out, so is TCs… Select your favorite Big G AI, and install a GFC500 AP… If you don’t have said dough… Vac is still in, but TC can still go… The wing leveler is a valuable tool until you get a modern replacement… This is mostly a flying in IMC concern… Flying in VMC… the wing leveler isn’t that critical… Flying without one is cognitively more tiring… PP thoughts only, not an avionics guru… Best regards, -a- Quote
drifter001 Posted June 3, 2022 Author Report Posted June 3, 2022 On 5/4/2022 at 7:40 PM, Bob R said: Yep, been through all that including the poly lines out to the servos in the wings thanks to a mouse. Pretty easy fix though. All of the poly flex tubing and fittings are all available from Parker using the original part numbers from Brittian. Have them somewhere if you need them. I just told the local supplier out here in sacramento it was for a boat. Howdy. would you happen to have the boot part number availalbe? one side has a busted boot so the old a&p just removed the whole assembly from that wing in case the previous owner wanted to send it to get repaired Quote
Shadrach Posted June 4, 2022 Report Posted June 4, 2022 2 hours ago, drifter001 said: Howdy. would you happen to have the boot part number availalbe? one side has a busted boot so the old a&p just removed the whole assembly from that wing in case the previous owner wanted to send it to get repaired I have serviceable servos if you’re in need. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.