Tips and Tricks for removing and reinstalling the Stall Switch

[AerostarDriver]

I unfortunately need to remove and replace my Stall Switch... I am looking at the inspection panel and the control rod between the hole and the Stall Switch, I am at a total loss for how to even access it. I am open to any ideas or suggestions as to how remove and replace. I also am open to any ideas that would allow me to fix it in place but it does not appear that is possible.

The failure I am having is that I can hear the micro switch make contact but the electrical contact is intermittent, I already went through the rest of the warning system and replaced the horn, the old one was working fine but was not the correct part number.

[carusoam]

There are a few threads that cover the issue from older planes to Fiki planes...

The FIKI guys have a heated switch that wears and tears... and sees a fair amount of replacement...

https://mooneyspace.com/search/?q="Stall switch"&updated_after=any&sortby=relevancy

Best regards,

-a-

[Raymond J1]

Would you like to know how to deposit this part ?

Edited March 27, 2021 by Raymond J