2OCOM-1A?

[FloridaMan]

What is this?

 

[chriscalandro]

where does it go? Come from?

You should ask whoever did that wiring the same question. What’s going on there?

Edited December 11, 2019 by chriscalandro

[kortopates]

Not sure, but it looks like it could be the Mooney wire #, if so you’ll be able to find it in your schematic. I’d start there.


Sent from my iPhone using Tapatalk

[1964-M20E]

looks like coax antenna wire??

[chriscalandro]

Looking at it on my computer it looks like a coax, probably from an antenna.  If that's a mooney label I'd guess for Com1.

 

Cut it in half and see what stops working. (not real advice)

Edited December 11, 2019 by chriscalandro

[Stephen]

2 hours ago, FloridaMan said:

What is this?

 

I vote a left index finger. ... by the lack of callouses on the sides, I'd say the owner does some IT related work. Appears to be touching some kind of shielded wire. 

Seriously, maybe 20com-1a= M20 Communication Cable type 1A? 

[EricJ]

3 minutes ago, Stephen said:

I vote a left index finger. ... by the lack of callouses on the sides, I'd say the owner does some IT related work. Appears to be touching some kind of shielded wire. 

The whole thing is labelled "POS", so that should tell us something.

 

[Stephen]

Just now, EricJ said:

The whole thing is labelled "POS", so that should tell us something.

 

One of the other labels says "CIA" so....

[chriscalandro]

I’ll add another - 

you can probably get another 20lbs if useful load by going through and removing zip ties. 
 

where in Florida are you?

Edited December 11, 2019 by chriscalandro

[Stephen]

@FloridaManI'm voting COM cable to antenna.  

[FloridaMan]

That’s what I’m thinking now since I now found one labeled 20COM-2A as well.