Romer Posted October 5, 2019 Report Posted October 5, 2019 Does anyone know what the material is and thickness used for pedal extensions?
RLCarter Posted October 5, 2019 Report Posted October 5, 2019 There are a few threads on here about the extensions, I posted the technical drawings there and I believe it calls out the material. I can repost them here if no else does this evening when I get back home
Romer Posted October 5, 2019 Author Report Posted October 5, 2019 I found the drawings thanks for the help.
Aerodon Posted January 13, 2020 Report Posted January 13, 2020 I needed to cut some parts this afternoon, so while I was at it I drew and cut the parts required for pedal extensions to do a trial fit. Now to find some 4130N in 0.063 and 0.125 to cut the final version. There is a local company that can water jet them for me, and they also have some CNC presses that can be programmed to bend just the right amount to create the joggles. Not very cost effective to do this in the overall scheme of things, but I tried 2 Mooney service centres and neither bothered to reply to my email. I take it that they are not interested in small orders, or not available? Aerodon 1
carusoam Posted January 13, 2020 Report Posted January 13, 2020 Show us some your CNC bender and joggles, Aerodon! Thanks for showing so much of your machining and design talent. Best regards, -a-
Recommended Posts