Shiny moose Posted July 12, 2019 Report Posted July 12, 2019 Looking to upgrade my 67 M20F left instrument panel, anyone have a CAD or a drawing, or an old panel that I can get the measurements from so I don’t have to remove mine until I’m ready Looking to install 2 G5s and remove the bend.
TX-Champ Posted July 12, 2019 Report Posted July 12, 2019 I've got a '70 C model and am looking for the same type of files. Thanks.
Hank Posted July 13, 2019 Report Posted July 13, 2019 4 hours ago, TX-Champ said: I've got a '70 C model and am looking for the same type of files. Thanks. Me, too--1970 C.
RLCarter Posted July 13, 2019 Report Posted July 13, 2019 CAD files are out there and so are the files for the Travel Boards, but they don't seem to be shared or at least not publicly
Hank Posted July 13, 2019 Report Posted July 13, 2019 16 hours ago, RLCarter said: CAD files are out there and so are the files for the Travel Boards, but they don't seem to be shared or at least not publicly I would be happy with a private share. I'm just replacing the broken-in-several-pieces cover.
Shiny moose Posted July 13, 2019 Author Report Posted July 13, 2019 They seem to be hard to find, I guess I do mine the old fashion way
RLCarter Posted July 13, 2019 Report Posted July 13, 2019 22 minutes ago, Shiny moose said: They seem to be hard to find, I guess I do mine the old fashion way There have been a few on here that have used Plexiglass or Lexan to lay out new panels. The clear plastic allows you to see if there is/would be placement issues, it's easy/cheap to work with, once all is good transfer it to aluminum 1
Aerodon Posted July 14, 2019 Report Posted July 14, 2019 I can help with a CNC'd panel for any Mooney. I've drawn some of them and cut a couple of M20K panels already. I don't share my drawings, there was a huge amount of trial and error getting all the instruments to fit properly etc. Send me an email with a panel picture and let's get started. I'm a big fan of the G5's - good way to clean up your panel and consolidate instruments. Aerodon supercub@gmail.com
Shiny moose Posted July 14, 2019 Author Report Posted July 14, 2019 16 hours ago, RLCarter said: There have been a few on here that have used Plexiglass or Lexan to lay out new panels. The clear plastic allows you to see if there is/would be placement issues, it's easy/cheap to work with, once all is good transfer it to aluminum Yes that’s how I have done it in the past. 1
Recommended Posts