mike20papa Posted November 26, 2018 Report Posted November 26, 2018 After ten years of owner/ops with N8335E, I have finally had enough with the original baffles. The center section had fretted edges at the right/left lap joints, busted up and patched pieces were the norm. So, rebuilt all cyl. attached pieces with .040, stiffened up the center section to eliminate all that vibration with full length angled pieces in the lap joints. any way, take a look. Joe 3 Quote
steingar Posted November 26, 2018 Report Posted November 26, 2018 My doghouse has seen better days, but I haven't the mad skillz to do that. Looks awesome. Quote
Hank Posted November 26, 2018 Report Posted November 26, 2018 Ooohhh!! That's beautiful!! I'm jealous. Can you share who did the work and where? Might get some more business. Personally, I've yet to find a sheet metal guy not scared of airplane work Quote
Keith20EH Posted November 26, 2018 Report Posted November 26, 2018 Very nice and Very motivating, I sure would like to do away with most of the screws.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.