Guest Spike Kavalench Posted October 4, 2018 Report Posted October 4, 2018 FYI guys, Alan is a straight shooter. I called him about a used throttle cable, explained the symptoms, and he said immediately: “You don’t need a cable” and went on to explain how to fix my issue and talked me out of buying a cable from him. This should also get me back flying a lot sooner, so a big THANK YOU to Alan for that!
GDGR Posted October 7, 2018 Report Posted October 7, 2018 I’m going to assume your Fuel Servi went with the engine, but thought I’d check anyhow.
Alan Fox Posted October 7, 2018 Author Report Posted October 7, 2018 2 hours ago, CDNflyby said: I’m going to assume your Fuel Servi went with the engine, but thought I’d check anyhow. I have one off of a 200 HP Arrow , if its the same
GDGR Posted October 7, 2018 Report Posted October 7, 2018 1 hour ago, Alan Fox said: I have one off of a 200 HP Arrow , if its the same Not sure if the -11 and -9 model numbers would be Interchangeable or not. But, that’s what I’m pulling off the Precision website.
takair Posted October 7, 2018 Report Posted October 7, 2018 Alan Do you happen to have one of these for an E model spinner? Rob
Alan Fox Posted October 8, 2018 Author Report Posted October 8, 2018 7 hours ago, takair said: Alan Do you happen to have one of these for an E model spinner? Rob Yes
Flyingfisher Posted October 10, 2018 Report Posted October 10, 2018 Left inboard fuel level sending unit?
carusoam Posted October 10, 2018 Report Posted October 10, 2018 Paging @Alan Fox... Somebody (flying fish) is looking for you... Best regards, -a-
Alan Fox Posted October 10, 2018 Author Report Posted October 10, 2018 On 10/7/2018 at 12:39 PM, CDNflyby said: Not sure if the -11 and -9 model numbers would be Interchangeable or not. But, that’s what I’m pulling off the Precision website. I sold the servo to a rebuilder yesterday
GDGR Posted October 10, 2018 Report Posted October 10, 2018 11 hours ago, Alan Fox said: I sold the servo to a rebuilder yesterday No worries. Mine is being sent out for overhaul as we speak. Thanks.
Recommended Posts