pedal extensions

[N9937c]

I was sent a set of drawings for the mooney brake/rudder extensions by one of our Most gracious members and while it would be no problem to make the parts as shown on the drawings I can see other problems in the transfer of the items to the members of Mooneyspace that "need" a little more to reach the pedals safely. I have have thought about furnishing just the metal parts to be assy. by ones a&p/ia but am looking for guidance here.

The extensions really do make a world of difference in how you look at the instrument panel.

thanks

larry

[jetdriven]

I was sent those drawings as well and I had a machine shop fab them up. I supplied the marterials, and did QC on them before installing.  what a difference, I can actually reach the pedals without the seat full forward.

[DaV8or]

Do you have the drawings for the 1.5" extensions? That's what I'm considering.

[Bennett]

I too would like to find a source for rudder pedal extensions.  I have them on the pilot's side (M20J), but everyone who sits in the co-pilot seat complains that they are too far away. If someone does manufacture them from the Mooney drawings, I would be interested in purchasing a set.

[N9937c]

I ordered the material this morning.  Should have some ready about May 1.

larry

[jetdriven]

LASAR has a couple sets of the 3"  copilot rudder extensions. Im not sure how they work, because we have no rudder pedals on the right side, only two ridiculously small tubes

[N601RX]

There is a picture of them in this thread.

http://www.mooneyspace.com/index.cfm?mainaction=posts&forumid=2&threadid=1168

 

 

[SideSlip Aviation]

Just wondering If that drawing is floating around anywhere? I tried that link above but it does not work anymore

Thanks

[Ned Gravel]

SideSlip:

E-mail me (egravel at rogers.com) and I will send them to you.

[Piloto]

If you do not want to mess with your rudder pedals here is another option http://en.wikipedia.org/wiki/Elevator_shoes They will work anywhere and no FAA approval required.

José