Panel over lay

[M20D6607U]

I'm wondering if anyone has or makes an affordable replacement panel overlay for the left side of my panel. Thank you for the help! Ron

[RLCarter]

Check with http://www.planeplastics.com/index they should 

[Hank]

Plane Plastics makes them, a ready-to-fit part requiring much work, selling at a custom made, ready-for-use part.

I also need one, different design, for my electric C. Going to fabricate my own, it's only a cosmetic part.

[carusoam]

Or...

Swap out the aluminum with a new one from Hendricks...

Use to be a Mooney owner and an MS visitor...

http://www.hendricksmfg.com/panels.html

Best regards,

-a-

[Mooney65E]

On 8/4/2017 at 6:55 PM, carusoam said:

Or...

Swap out the aluminum with a new one from Hendricks...

Use to be a Mooney owner and an MS visitor...

http://www.hendricksmfg.com/panels.html

Best regards,

-a-

Use to be a Mooney owner?? I still am   Thanks for all of your endorsements!!

[1964-M20E]

I vote rearrange the panel for a standard layout.  Unless of course you are trying to preserve it as close to original as possible.

In the mean time it may not look the best but I'd fly without the plastic panel it's just for show anyway.  Just make any new placards with a small label maker and you good to go.

 

 

[carusoam]

5 hours ago, Mooney65E said:

Use to be a Mooney owner?? I still am   Thanks for all of your endorsements!!

@Mooney65EYou're still here!

I suffer from fuzzy memories...

i remember the panels better than the peoples.

If you add some data to the avatar and your website to the signature line, it's possible that I could remember you better...?

This is the best example of under promise and over deliver when it comes to online marketing...

Best regards,

-a-

[Raptor05121]

5 hours ago, Mooney65E said:

 

 

How much?

[Mooney65E]

Our basic custom panels start at $295. The custom panel  you see here is $595 per side. It'll increase the value of an old Mooney by just a little more than that