Jim Peace Posted April 15, 2016 Report Posted April 15, 2016 Had a fueler go a little overboard on a top off request at Independence Kansas... See enclosed picture. What are suggested ways to clean avgas and oil stains from wing walk? This same fueler tried to charge me for 3 extra gallons of fuel. My brother and I had to lean on him to see his error. We were lucky that the confrontation with this city FBO employee was in front of an inspector from weights and measures that happened to be doing an inspection...... The whole thing seemed so shady.....be cautious at IDP if not using self service.........
N201MKTurbo Posted April 15, 2016 Report Posted April 15, 2016 Mask it and spray paint it. Just some cheap flat black. It will look bueatiful! 2
LANCECASPER Posted April 15, 2016 Report Posted April 15, 2016 43 minutes ago, N201MKTurbo said: Mask it and spray paint it. Just some cheap flat black. It will look bueatiful! + 1
Jim Peace Posted April 15, 2016 Author Report Posted April 15, 2016 so there is no detergent and scrub brush method that anyone has tried?
Raptor05121 Posted April 15, 2016 Report Posted April 15, 2016 I would try regular automotive soap and water first off. Cheapest and easiest 1
Jeff_S Posted April 15, 2016 Report Posted April 15, 2016 I cleaned and painted the wing walk on my J several years ago. There was a special spray cleaner and paint that I used...can't remember the name of it but I'll check it out at the hangar tomorrow and let you know. The results turned out really well. 3
Jim Peace Posted April 15, 2016 Author Report Posted April 15, 2016 looks great please let me know what you used
Jeff_S Posted April 16, 2016 Report Posted April 16, 2016 Here you go. I can't remember where I bought them but I'm sure you can just Google it and find some sources.You use the cleaner to get as much of the oil and grime off as possible, then use the spray touchup to give it that fresh, new wing-walk smell! Good luck. Jeff 4
pirate Posted April 16, 2016 Report Posted April 16, 2016 If it's not all worn out I just use straight from the kitchen Dawn with a hand scrub brush
rbridges Posted April 16, 2016 Report Posted April 16, 2016 Try the soap and water method first. If necessary, wing walk paint at spruce is very easy to apply. The wing walk is probably the easiest thing to fix on the plane. 1
RLCarter Posted April 16, 2016 Report Posted April 16, 2016 My wingwalk had the same stains along with dried paste wax and who knows what else. I used soap & water and a soft bristle scrub bush, once clean and dry I sprayed WD40 and wiped it off really good with a cloth, took less than an hour and looks good. The WD also darkens the wingwalk paint which tends to get chalky after time.
Flynnupe94 Posted April 25, 2016 Report Posted April 25, 2016 I ran into this problem with the J that I owned before my O, I elected to paint over the old wing walk with a wing walk material that I ordered from Aircraft Spruce. It was a painless process that took a couple of hours to do and looked very good. Just let me know I will find the name of it for you...
Bob_Belville Posted April 25, 2016 Report Posted April 25, 2016 For a complete restoration a quart of compound will do at least 2 planes. My A&P had me use a small roller instead of a brush and to be sure to keep the material stirred up as the grit sinks pretty quickly. No need to strip old just clean surface, mask edges, roll on. Easy project. Pics are before and after. http://www.aircraftspruce.com/catalog/cspages/randolphwingwalk.php 3
DXB Posted April 25, 2016 Report Posted April 25, 2016 Cool thread! Nice easy project for this summer that I am unlikely to screw up. The grit has worn smooth on mine in places, so I'll probably go with Bob's solution above Now if only there was a way to get the wing walk off my flap - I'm guessing this is not so easy and requires stripping and repainting the whole flap. I don't know why someone felt the need to put it there - it's just an invitation for passengers to step on my flap. Last week a fellow C model owner inadvertently stepped on it because he wasn't used to seeing it there on his plane.
rbridges Posted April 25, 2016 Report Posted April 25, 2016 15 minutes ago, DXB said: Cool thread! Nice easy project for this summer that I am unlikely to screw up. The grit has worn smooth on mine in places, so I'll probably go with Bob's solution above Now if only there was a way to get the wing walk off my flap - I'm guessing this is not so easy and requires stripping and repainting the whole flap. I don't know why someone felt the need to put it there - it's just an invitation for passengers to step on my flap. Last week a fellow C model owner inadvertently stepped on it because he wasn't used to seeing it there on his plane. my flap has "no step" written on it. You may want to find a way to put that on the wing walk paint. I'd hate for you to jimmy up your flap.
Bob_Belville Posted April 25, 2016 Report Posted April 25, 2016 5 hours ago, rbridges said: my flap has "no step" written on it. You may want to find a way to put that on the wing walk paint. I'd hate for you to jimmy up your flap. I tell newbies that they won't hurt the flap but it will give way if they step on it and they might hurt themselves when their foot slips off the trailing edge. 1
DXB Posted April 25, 2016 Report Posted April 25, 2016 5 hours ago, rbridges said: my flap has "no step" written on it. You may want to find a way to put that on the wing walk paint. I'd hate for you to jimmy up your flap. Yeah I always tell them when boarding but they forget by the time they get out. My flap does have "no step" on it in small black letters. I might need it in large red letters on the wing walk itself.
Raptor05121 Posted April 25, 2016 Report Posted April 25, 2016 I thought about adding "no step" to my flaps, but I am always present when people are getting in/out and 90% of the people I fly with are somewhat knowledgeable about planes and know to avoid it already.
takair Posted April 26, 2016 Report Posted April 26, 2016 My paint shop painted the wing walk on the flap and then went under before they would warranty it. Ended up painting "No Step", but as others indicate it is not fool proof. I remind people going in or out and even then I've had them step on it. Bob's approach helps, tell them it will give way and they will fall. When I get a repeat offender near the plane, I put the flap in takeoff position. This seems to be the best approach, have had no offenders this way.
LANCECASPER Posted January 31, 2017 Report Posted January 31, 2017 On 4/25/2016 at 4:02 PM, Bob_Belville said: I tell newbies that they won't hurt the flap but it will give way if they step on it and they might hurt themselves when their foot slips off the trailing edge. I tell newbies that they won't hurt themselves if they step on the flap, but I will hurt them if they step on the flap . . seems to work : ) 6
thinwing Posted January 31, 2017 Report Posted January 31, 2017 On 4/14/2016 at 8:00 PM, N201MKTurbo said: Mask it and spray paint it. Just some cheap flat black. It will look bueatiful! That's it
Raptor05121 Posted January 31, 2017 Report Posted January 31, 2017 I saw a Cherokee the other day with what looked to be self-adhesive strips, that were color matched. So instead of one massive black spot, he had four long strips running front to back, all white in color. I liked it!
Bennett Posted January 31, 2017 Report Posted January 31, 2017 I added "no step" to my flap, and do far as I can tell, no one has. For what it is worth, ArtCraft paints their non skid in the same color as the wing. Sent from my iPhone using Tapatalk
Recommended Posts