Dukes Gear Rubber Drive Coupling

[slowflyin]

Looking for some advice.  I serviced my landing gear actuator(dukes 20:1) per the SB (with my A&P) and have a concern regarding the amount of play in the rubber drive coupling between the Dukes electric motor and the worm gear shaft.    Can anyone offer up what's normal?  Mine will move back and forth a considerable amount. I've consulted my service manual with no luck.  

[Fritz Kaiser]

Hello slowflyin,

I don't know how many play is normal, but i' ve 2 of those rubbers in stock.

Do You need a new one?

Greetings Fritz

[slowflyin]

I may, I've been considering the 40:1 gear set and the kit comes with a new one.  I'll be making a few calls in the morning to check availability.  Thanks for the reply.

You wouldn't happen to have the main gear "bumpers"?   I went over all my gear rigging this weekend and the MS Manual calls for a distance from the bumper.  I have no such bumper and my gear just kinda floats when in the raised position.   Thanks again.

 

joe