Jump to content

ArtVandelay

Basic Member
 View Profile  See their activity

  • Posts

    10,029

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by ArtVandelay

  1. ArtVandelay
    https://www.garmin.com/en-US/promotions/aviation/directto/?utm_source=Americas&utm_medium=email&utm_campaign=en-US%20Delivery%2C%20GLOBAL-AVN-NEWS-MCJT64895-SeptOct2023eNewsletter
  2. ArtVandelay
    You may want to remove the closest inspection plate and take a look inside.
  3. ArtVandelay
    I have a 78J and don’t have any issues with the GFC500 with latest software updates, FWIW. Please make sure you have no sticking of the controls and trim.
  4. ArtVandelay
    That software has been available since January. AD is yesterday’s news.
  5. ArtVandelay
    Except for the fact you need a bigger hole.
  6. ArtVandelay
    Don’t they do that after you land? So may not have been on ATC frequency.
  7. ArtVandelay
    Interesting, my KLN90A in my list shows 13.5 installed, 14.2 when removed. Nothing in my panel is higher than 21 (GFC 507).
  8. ArtVandelay
    Dealer is a liar, probably a former used car salesman.
  9. ArtVandelay
    Skytec has PMA starter solenoids, not Mooney original model so a slight modification to mounting may be required.
  10. ArtVandelay
    Avidyne already has DFC90, all they have to do is certify it for Mooneys, which they said they would do years ago when it was introduced. Only Garmin seems to be able to back up their promises.
  11. ArtVandelay
    Upgrade process can also be rewarding, getting it the way you wanted. Most of the year? I would say 3-6 months for a complete upgrade depending on unexpected problems found. Before you take it to the shop, do an oil change so your engine internally isn’t bathed in dirty oil.
  12. ArtVandelay
    You can get a panel mount compass, cleans up the view.
  13. ArtVandelay
    It’s not certified for IFR use.
  14. ArtVandelay
    I don’t NEED an airplane either, if flying that slow, I would just drive.
  15. ArtVandelay
    Js don’t have placard probably because they only came with electric (they were an option in the later years).
  16. ArtVandelay
    You could get covers for the wings I believe, that would solve this problem and protect against hail damage.
  17. ArtVandelay
    You can always just leave them off and log the removal of the STC. I did this with a couple of STCs.
  18. ArtVandelay
    If I had a SS of any sort, I would look to buy a used computer/display of same model as a spare.
  19. ArtVandelay
    Yes.
  20. ArtVandelay
    GP and GTN/G3X interfaces are very similar, for that reason I would go with GP if you have Garmin avionics, otherwise I probably would go with whatever you want based on others opinions, or pricing.
  21. ArtVandelay
    GFC500 servos don’t have a clutch, don’t know about other modern AP models.
  22. ArtVandelay
    Aren’t modern servos sealed, not to protect against corrosion X but moisture (rain)?
  23. ArtVandelay
    And they say God doesn’t have a sense of humor. [emoji38]
  24. ArtVandelay
    Daytona Aircraft Services is a Mooney service center.
  25. ArtVandelay
    If you’re installing the GFC 500 then yes, you already have to run wires to the tail, the CAN bus is going to be close by as well.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.