Matthew P Posted July 21 Report Posted July 21 How do you replace this U-channel, there is no clearance between the vertical and horizontal surfaces
Kelpro999 Posted July 21 Report Posted July 21 I have mine removed. It looks like starting from the fin spar cutout and plenty of soap, feeding it forward around the leading edge and back out the other side cutout will work. It has to be trimmed at the spar area inside edges then the tails fed rearward after trimming the length.
Jim Peace Posted July 22 Report Posted July 22 I recently found out you can get that stuff in white and then no paint chipping issues.
PT20J Posted July 22 Report Posted July 22 11 hours ago, Jim Peace said: I recently found out you can get that stuff in white and then no paint chipping issues. Where did you find white u-channel?
Jim Peace Posted July 22 Report Posted July 22 29 minutes ago, PT20J said: Where did you find white u-channel? Try this site...it was a few years ago for the exact one, not sure if they still have it: https://www.brownaircraft.com/u-channel-seals-s/56.htm 1
Recommended Posts