Echo Posted November 3, 2023 Report Posted November 3, 2023 I am having an EDM 830 installed in my panel after first of the year. My OEM Garwin six pack was pretty scary looking. (Even had cracked glass), but everything worked. I need to retain the OEM gauges so found a replacement on The Ebay. Removed old today and will install and confirm that all are working (Previous owner added an EI cylinder Temp and exhaust gas temp (primary, but a single readout with toggle for choosing cylinder or egt and then toggle to each cylinder with one readout.) that is why tape over OEM Garwin pack. Surprising how worn all the numbers and MOONEY logo are VS. my replacement. Fingers crossed they all work... Quote
DCarlton Posted November 3, 2023 Report Posted November 3, 2023 You can have these overhauled and the faceplates re-silkscreened. At least for the individual gages. I believe Air Parts of Lock Haven does the work. Quote
Echo Posted November 3, 2023 Author Report Posted November 3, 2023 8 hours ago, DCarlton said: You can have these overhauled and the faceplates re-silkscreened. At least for the individual gages. I believe Air Parts of Lock Haven does the work. I would consider doing that IF the $275 replacement is inop. I would swap the cracked glass out. It will be nice to know I have a "back-up" that works. This was a purely cosmetics change for me. Quote
DCarlton Posted November 3, 2023 Report Posted November 3, 2023 2 hours ago, Echo said: I would consider doing that IF the $275 replacement is inop. I would swap the cracked glass out. It will be nice to know I have a "back-up" that works. This was a purely cosmetics change for me. I bought a spare gage cluster set too a few years ago. 1 Quote
Echo Posted November 5, 2023 Author Report Posted November 5, 2023 Happy to report the new six pack is working great. Whew. That was a low cost nice upgrade. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.