bcg Posted October 2, 2023 Report Posted October 2, 2023 Could someone with hydraulic flaps please take a picture of the labeling for their flaps on the panel for me? Mine was all worn off the old panel and I'd like to have it as close to original as I can on the new panel I'm having made. Thanks! Sent from my Pixel 6a using Tapatalk
Igor_U Posted October 2, 2023 Report Posted October 2, 2023 As per Type certificate, placard should be: "RETRACT FLAPS AFTER LANDING." (hydraulic flaps only)
Greg Ellis Posted October 2, 2023 Report Posted October 2, 2023 I have a 63 C model. If you zoom in this photo you can see what was original on my old panel and duplicated on the new one here. The lettering may not be the exact same size or font but the wording is what was on my original panel. And, on my original panel, the word retract was on the left side of the flap retract knob like you see here split form the rest of the wording above the flap handle. 1
bcg Posted October 3, 2023 Author Report Posted October 3, 2023 Thanks, guys. This is helpful.Sent from my Pixel 6a using Tapatalk
Recommended Posts