GNS 530 and GTX 330 to 530W and GTX 330ES

[Gubni]

I am working to get my plane in annual and the IA said he would do avionics for me if I keep it simple. I had 2 old GNS530s and GTX330 and wanted to upgrade one of them to a 530 WAAS and 330ES for ADSB. I read this only requires 2 pairs of wires to be added. I have the units here to be installed, but I can't seem to find what needs to be done to connect them. I also have the new WAAS antenna and some new coax to go with it.

Edited October 20, 2022 by Gubni

[Schinderhannes]

You need to connect 1 of the RS232 out channels on the 530w with 1 of the RS232 in channels of the 330es. 330es has a pin for ground on the 530w you connect ground to the backplate. Wire looks similar to the attached picture. If needed I can provide wire and diagram.

 

[Gubni]

20 minutes ago, Schinderhannes said:

You need to connect 1 of the RS232 out channels on the 530w with 1 of the RS232 in channels of the 330es. 330es has a pin for ground on the 530w you connect ground to the backplate. Wire looks similar to the attached picture. If needed I can provide wire and diagram.

 

Wow! Yes, that is what I need. I just sent you a message.