David Perry Posted April 11, 2018 Report Posted April 11, 2018 I got this idea from a Piaggio. Put a key ring through your headset then install a cable clamp from Home Depot on the plane and you have a handy headset hangar. 6 Quote
LANCECASPER Posted April 12, 2018 Report Posted April 12, 2018 Looks like a great idea, but not sure i want to hit my head on that in a crash. 1 Quote
kmyfm20s Posted April 12, 2018 Report Posted April 12, 2018 30 minutes ago, LANCECASPER said: Looks like a great idea, but not sure i want to hit my head on that in a crash. I was thinking turbulence but I like the basic idea. Quote
Bartman Posted April 12, 2018 Report Posted April 12, 2018 I put my Bose X on the yoke shaft. Leaving the headset plugged in, the cord is exactly long enough to wrap over the horn of the opposite yoke and lay across the three control knobs and out of the way. Do the same on the passenger side and exit the aircraft. Quote
Brandontwalker Posted April 12, 2018 Report Posted April 12, 2018 I use the gear crank. Sent from my iPhone using Tapatalk Quote
David Perry Posted April 12, 2018 Author Report Posted April 12, 2018 The low profile is part of what I liked about these hooks. They don't stick out much beyond the bolt that is already there. These are for the back seat by the way. I had been hanging them from the coat hangar in the baggage compartment, but the cables were always getting caught under the baggage. Quote
bradp Posted April 13, 2018 Report Posted April 13, 2018 Probably better / easier / safer would be to make a small leather strap with an eyelet washer and a snap. No hooks sticking out - similar to what Cirrus does with their headset hangers. The Cirrus ones are located on the shoulder of the seat back in the “middle aisle”. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.