Jump to content

Recommended Posts

Posted

Forgot to add I'm supposed to send them pictures of Mooney wing tip lights a,b,c,d,e,f,   ALl the flat end plates ones. 

Posted

Thinking outside the box, what about the antenna? Where would it go AND there are two units , one each side. One for OUT and one for IN. 

True enough on the strobes for now but in fact the high discharge EMF from the strobe tube might be a problem for the micro electronics in the ADSB unit.being that close to it. 

Guest paulie
Posted

I bought one for my RV, can't use it in anything but LSA and experimental.

Posted

I like the idea, but I'm wondering if they will be able to certify with the wingtip position. I would think they will have great coverage on one side and not so good on the other.  Also, the WAAS is supposed to have full view of the sky, seems they would have the same problem.  They seem like pretty smart guys, so I wouldn't be surprised if they have it worked out.  Will keep an eye out on this one.  

Posted

This seems very similar to the Levil Beacon.

http://aviation.levil.com/beacon-978.html

Again, ready for the experimental market, but promises for the certified version.

I am definitely interested in one of these ADS-B solutions for my experimental...depending on how that goes, I may consider either for my Mooney.

Thw only thing worse than a mandatory ADS-B installation is two mandatory instalations.  :wacko:

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.