podair Posted March 10, 2016 Report Posted March 10, 2016 Just got a call from my mechanic, seems like my exhaust pipe is beyond repair or welding and I need a new one. I immediately thought 'Powerflow !' but the rest of the system is fine , just need a tailpipe. Looking through the parts manual for a 1967 M20F seems I need pn 850-3 However , some of the exhaust part sellers have a later 'ribbed muffler' system , any ideas if that might have been retro fitted on a 1967 M20F? Of course, going to call the mechanic tomorrow and have him check, but just curious if that might be the case before I get part quotes (my mechanic subcontracts that job to me, he concentrates on the nuts and bolts, I make the calls, fine by me!).
mooniac15u Posted March 10, 2016 Report Posted March 10, 2016 Try Dwaley Aviation. They can likely repair it for you at a very reasonable price. http://www.dawleyaviation.com 1
N601RX Posted March 10, 2016 Report Posted March 10, 2016 I have an extra one that is in good condition. It came from a ribbed muffler. Some mufflers have welded studs instead of ribs. Not sure if tailpipe is the same.
kerry Posted March 10, 2016 Report Posted March 10, 2016 I recommend Dawley also. If you send in your tail pipe and it's not repairable then they can duplicate it. 1
M20F Posted March 10, 2016 Report Posted March 10, 2016 4 hours ago, mooniac15u said: Try Dwaley Aviation. They can likely repair it for you at a very reasonable price. http://www.dawleyaviation.com +1
podair Posted March 11, 2016 Author Report Posted March 11, 2016 Lasar said the same... just send it to Dawley!
Recommended Posts