ArtVandelay Posted September 12, 2015 Report Posted September 12, 2015 My FF tends to bounce around, like 7.6-7.8, as reported by my JPI. Is this something to be worried about? Quote
Marauder Posted September 12, 2015 Report Posted September 12, 2015 My FF tends to bounce around, like 7.6-7.8, as reported by my JPI. Is this something to be worried about? Nope (or at least I hope so). My does as well. Sent from my iPad using Tapatalk Quote
mike_elliott Posted September 12, 2015 Report Posted September 12, 2015 If it were to vary between 7 and say 18 GPH, then I would suspect a leak in the system, particularly at the fuel selector valve. 1 Quote
Oscar Avalle Posted September 17, 2015 Report Posted September 17, 2015 Mine does too. It varies from 9.2 to 10.0. I was told it may be the place where I installed the transducer. Quote
mitch0537 Posted September 20, 2015 Report Posted September 20, 2015 Check the installation of the transducer. It must be level. That is, the inlet and the outlet are to be the same height. Also it must be upright in that the wires come out the top. Make sure that the fittings into the transducer don't leak. Check the connector to the transducer, they come with the molex connectors which have the tendency for the female pins to spread. Any signs of the above is an installation problem. How old is the installation? The transducer itself could need to be replaced. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.