A/C Grounded! Part Needed and Can't Be Found

[orionflt]

should be able to use the klixon 7270 series from spruce.

 

Brian

[carusoam]

I bought the M20C landing light toggle CB/switch from aircraft spruce.  The only challenge is during install you have to remove the brass bus bar from the other CBs next to it.  A good time to have access from above...

Check and see if your panel supports are worn as well.  Those bits are also available from the same spot.  Get nice brass acorn nuts to go with that.

Panel sag, bumps the switch, switch gives no mechanical resistance and turns itself off...

Best regards,

-a-

[yvesg]

Part is on order from Spruce. Thanks for your help folks!

Yves

[Seth]

On 7/30/2015 at 7:43 PM, M20F-1968 said:

Why can you not spend your money to put in a new circuit with an LED landing light and new modern switch.  You can get a DER to sign it off if you need to.  As long as he has proper approved data to work with, you can make the modifications.

 

John Breda

Depends on the FSDO.  Some FSDOs simply do not allow it.  It's amazing.

-Seth