Mike A Posted April 10 Report Posted April 10 Hey everyone, it looks like I need to replace the fuel and oil hoses on my 231. Anyone have recommendations on where to get them from? Quote
kortopates Posted April 10 Report Posted April 10 https://www.aircrafthose.com/can’t go wrong as they guarantee fit too and have no age limit.But lots of other folks do these including aircraftspruce.You can, or your A&P, can just make them too, but make they have ability to pressure test them before installing.Sent from my iPhone using Tapatalk Quote
N201MKTurbo Posted April 10 Report Posted April 10 All the AS hoses are made at the hose shop at my home drome. I have spent about 4 hours in the back of the shop making hoses for a custom project I was working on (not aviation) they are good at what they do. The hoses are all made to spec and they are neurotic about it. If the hoses don’t fit then the spec was wrong. To make sure you get what you have now, send in the old hoses for them to copy. Second, write down the part numbers from your existing hoses and send those in. Third just have them make them by engine and aircraft type, but there is more room for errors doing that. The hose part numbers have all the info needed to make the new hoses. 1 Quote
Gee Bee Aeroproducts Posted May 9 Report Posted May 9 We do tso Teflon in two colors Compare our skin tight as1072 firesleeve to other mfg"s We Cover the clamp and can install hose identification as required. Iam doing two tio541 tomorrow, we made these hoses back in 1995 for same customer. 1 Quote
kerry Posted May 9 Report Posted May 9 I've used Luky's Hardware in Burbank California. I send them my old hoses, and they can them up for however you like. 1 Quote
Gee Bee Aeroproducts Posted May 9 Report Posted May 9 Are they a tso shop What mfg? Blue or Black firesleeve? Quote
Gee Bee Aeroproducts Posted May 9 Report Posted May 9 19 minutes ago, kerry said: I've used Luky's Hardware in Burbank California. I send them my old hoses, and they can them up for however you like. There not a tso shop , just surplus parts . check date of mfg if hose date of tso date of proof test Hoses must be tso certified for installation , ask your ap or I.a. safety is inexpensive. Quote
mooniac15u Posted May 9 Report Posted May 9 10 hours ago, Gee Bee Aeroproducts said: Are they a tso shop What mfg? Blue or Black firesleeve? Do you have a TSOA? I don't see you on the list. Quote
Gee Bee Aeroproducts Posted Sunday at 03:30 PM Report Posted Sunday at 03:30 PM All hoses have a tso tag custom colors in firesleeve Tio541 from a B60 Duke shown 20 Assys for two engines, I did this customers hoses in 1995. we have completed the airframe to engine , next are the accumalator hoses . Quote
cliffy Posted yesterday at 02:08 AM Report Posted yesterday at 02:08 AM On 5/11/2025 at 9:30 AM, Gee Bee Aeroproducts said: All hoses have a tso tag custom colors in firesleeve Tio541 from a B60 Duke shown 20 Assys for two engines, I did this customers hoses in 1995. we have completed the airframe to engine , next are the accumalator hoses . Wish you could make the hyd hoses for my Rolls Royce :-) The colors would look cool at the car show :-) As you can tell I'm not a purist in the car world Quote
Gee Bee Aeroproducts Posted 23 hours ago Report Posted 23 hours ago We mfg molded silicone for various autos , were the only mfg that does the matte fabric finish. mbz 190-300 Toyota Tundra Vw water various Mk platforms Bus / Vanagon Porsche turbo intercooler Chevy SRS Seadoo models Husaberg / Ktm Ducati last week the new stark varg , ordered two of those one arrived today. You will find me each year at Sema with one of my classics and beautiful Columbian wife . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.