Wanted: Yoke- "Box" CAD-model

[NicoN]

We have a M20k with the trim switch in the left yoke horn.  Also there is the MIC-Button, trim interrupt switch and we want a AP-disconnect switch.

I am looking for a littel box to assemble on top to have more space for all the switches.

 

Is there a 3D CAD model available or a pre-frabricated box?

Google is PITA if you do not have the correct words to serach for

[Lois]

Check out Etsy. I had a guy in Louisiana custom build a new one from scratch.  Unfortunately I don’t have his contact info anymore. I just searched KFC200. 

[Lois]

[Lois]

He went under the name ZedAxisLLC. 

[M Terry]

I have the STL file, get it here

https://www.thingiverse.com/thing:4340751

a 3d printing shop in Irvine made one for me, the avionics shop painted it and put the letters on,

 

[bcg]

If you can't get it worked out, I can help you. I recently made a new step crank trim plate for a guy with a B. Picture is the last test print, I fixed the arrows and cleaned up the curves for the final. I have a filament changer on my printer so I can put any placards in as it prints instead of having to add it afterwards.

Sent from my Pixel 6a using Tapatalk

[47U]

On 6/14/2024 at 8:35 PM, bcg said:

I recently made a new step crank trim plate for a guy with a B.

Ummm… isn’t that supposed to say 2 1/2 turns?  

Very nice…

[bcg]

Ummm… isn’t that supposed to say 2 1/2 turns?  
Very nice…

Another reason it was the last test print...

Sent from my Pixel 6a using Tapatalk

[Hamburglar]

I've got a file you are welcome to look at. I just had one done at a 3d printing shop and I like the way that it turned out.