exM20K Posted May 2 Report Share Posted May 2 Can someone here tell me what the inside diameter of the nose gear is? I’d like to make a rack for my sidewinder towbar so it’s not laying on the ground. -dan Quote Link to comment Share on other sites More sharing options...
mooniac15u Posted May 2 Report Share Posted May 2 When you say the "inside diameter of the nose gear" I'm guessing you're asking about the tube where you insert the towbar. If so, then what you're looking for is here: 1 Quote Link to comment Share on other sites More sharing options...
PT20J Posted May 2 Report Share Posted May 2 I just screwed a large plastic-coated hook in the wall and hang it from the drill handle so it hangs conveniently right side up. 2 Quote Link to comment Share on other sites More sharing options...
exM20K Posted May 2 Author Report Share Posted May 2 5 hours ago, PT20J said: I just screwed a large plastic-coated hook in the wall and hang it from the drill handle so it hangs conveniently right side up. I could do that, but I’ll have to frame it up as I can’t penetrate the wall. Thanks Quote Link to comment Share on other sites More sharing options...
bcg Posted May 3 Report Share Posted May 3 I use 3/4 pipe to make tow bars, it has an OD of just over 1". 1 Quote Link to comment Share on other sites More sharing options...
AndreiC Posted May 3 Report Share Posted May 3 As the original poster of the former question, I can confirm that the ID of the steering tube above the nose gear is just a tad over 1”, as @bcg said. Quote Link to comment Share on other sites More sharing options...
EricJ Posted May 3 Report Share Posted May 3 A 1" OD pipe will fit in it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.