Little Dipper Posted March 3 Report Share Posted March 3 (edited) UPDATE Rented a PA28-180 and stopped in at Smoketown to check the progress of my Mooney and am pleased with what I see so far. On a side note, I had forgotten how nice the Ovation performs until I rented another I flew a rental. I can't wait to get her back. Norm The paint on my Ovation stood up pretty year but after 29 years of flying ice pellets and crystals had taken their toll especially above the wind screen. So off to Lancaster Aero she went to get a makeover. I am having per painted the same colors and paint scheme as original. This is going to take six to eight weeks for completion as well as a sizable dent in my pocket. Unless I rent a plane this will be the longest duration I have gone without piloting an aircraft since 1985. UPDATE Rented a PA28-180 and stopped in at Smoketown to check the progress of my Mooney and am pleased with what I see so far Edited March 15 by Little Dipper progress update 4 Quote Link to comment Share on other sites More sharing options...
MooneyMitch Posted March 3 Report Share Posted March 3 Congratulations! That will be so terrific seeing the new fresh paint. Looking forward to finished photos please. 1 Quote Link to comment Share on other sites More sharing options...
Marc_B Posted March 3 Report Share Posted March 3 1 hour ago, Little Dipper said: Unless I rent a plane this will be the longest duration I have gone without piloting an aircraft since 1985. That's an awesome streak that I absolutely don't think you should break! Definitely will need to rent then!! Quote Link to comment Share on other sites More sharing options...
Schllc Posted March 3 Report Share Posted March 3 Great excuse to go get another rating! Taildragger, seaplane, glider etc… 2 Quote Link to comment Share on other sites More sharing options...
Schllc Posted March 3 Report Share Posted March 3 At 30 years do you do the windows and windshield too, or the fuel tanks? I’ve always thought the fuel tanks are a must before new paint…. 1 Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted March 3 Report Share Posted March 3 Now would be a good time to change your tail number to something more personal. 1 Quote Link to comment Share on other sites More sharing options...
toto Posted March 3 Report Share Posted March 3 53 minutes ago, Schllc said: Great excuse to go get another rating! Taildragger, seaplane, glider etc… +1 to this No better time to do it - you won’t feel like you’re abandoning your Mooney 1 Quote Link to comment Share on other sites More sharing options...
Fly Boomer Posted March 3 Report Share Posted March 3 3 hours ago, Little Dipper said: I am having per painted the same colors and paint scheme as original. This is going to take six to eight weeks for completion as well as a sizable dent in my pocket. How do they protect the TKS panels? Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 4 Author Report Share Posted March 4 16 hours ago, Fly Boomer said: How do they protect the TKS panels? The paint shop didn't want to remove them because they are riveted on and have them covered up pretty well. Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 4 Author Report Share Posted March 4 16 hours ago, ArtVandelay said: Now would be a good time to change your tail number to something more personal. I never thought about that till you brought it up. Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 4 Author Report Share Posted March 4 17 hours ago, Schllc said: At 30 years do you do the windows and windshield too, or the fuel tanks? I’ve always thought the fuel tanks are a must before new paint…. The glass is in excellent condition as I have been anal about getting the bugs off before they dry/fry on the glass and keeping it clean. I didn't do the fuel tanks because I had Weep No More in Minnesota reseal them almost nine years ago in Minnesota. To your point I hope I am not making a mistake on that. 1 Quote Link to comment Share on other sites More sharing options...
wombat Posted March 4 Report Share Posted March 4 If you have the time and flexibility, the ideal situation would be to strip the plane first, then reseal the tanks, then paint the plane. The chemical strippers can work their way through the seams and rivets and damage the tank sealant. You can mechanically strip instead but I expect most paint shops would rather not do that since the additional labor expense is probably uncompensated and that eats into their profit. Even if they charge extra for it, it reduces their throughput. Quote Link to comment Share on other sites More sharing options...
GeeBee Posted March 4 Report Share Posted March 4 3 hours ago, Little Dipper said: The paint shop didn't want to remove them because they are riveted on and have them covered up pretty well. They are not riveted. They are held on by adhesive. What looks like rivets are actually anodes. Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 4 Author Report Share Posted March 4 21 minutes ago, GeeBee said: They are not riveted. They are held on by adhesive. What looks like rivets are actually anodes. Your probably right. I don't know what anodes are but they look like rivets and were installed by the factory. In either event I wouldn't have wanted the paint shop to remove the TKS and disturb all of the plumbing that goes along with it. Over the years I had to replace two stall strips which became unglued. Quote Link to comment Share on other sites More sharing options...
CAV Ice Posted March 4 Report Share Posted March 4 @Little Dipper Make sure the TKS panels are very well protected. If they get damaged by solvent it would require panel replacement $$$$. The panels are held on with sealant and usually riveted in the corners. 99% of the time when a panel has to be removed it ends up getting destroyed due to the separation of the backplate and front plate. That is going to be a nice looking Mooney. Can't wait to see the end result. 1 Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 4 Author Report Share Posted March 4 5 minutes ago, CAV Ice said: @Little Dipper Make sure the TKS panels are very well protected. If they get damaged by solvent it would require panel replacement $$$$. The panels are held on with sealant and usually riveted in the corners. 99% of the time when a panel has to be removed it ends up getting destroyed due to the separation of the backplate and front plate. That is going to be a nice looking Mooney. Can't wait to see the end result. Thanks. Appreciate the advice. Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 15 Author Report Share Posted March 15 Getting close to completion. I am pleased with the workmanship so far. If I am lucky I will be flying this time next week. Norm N995k 2 Quote Link to comment Share on other sites More sharing options...
redbaron1982 Posted March 15 Report Share Posted March 15 3 minutes ago, Little Dipper said: Getting close to completion. I am pleased with the workmanship so far. If I am lucky I will be flying this time next week. Norm N995k Hey, is looking great! Do you mind sharing rough numbers on how much it cost? Thanks! Quote Link to comment Share on other sites More sharing options...
Pinecone Posted March 15 Report Share Posted March 15 Hmm, I should have stopped and looked in. Roberto at Smoketown is doing my interior. Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 16 Author Report Share Posted March 16 20 hours ago, redbaron1982 said: Hey, is looking great! Do you mind sharing rough numbers on how much it cost? Thanks! 31K 1 Quote Link to comment Share on other sites More sharing options...
Little Dipper Posted March 16 Author Report Share Posted March 16 19 hours ago, Pinecone said: Hmm, I should have stopped and looked in. Roberto at Smoketown is doing my interior. You are in good hands. Roberto did my front seats. i am vey pleased with his craftmanship. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.