Gear Dust Boot PN 560070-001

[Q The Engineer]

Guys,

I've been looking for dust boots PN 560070-001 for a couple of hours with no luck.  It looks like Lasar had a replacement part that is no longer available.  Does anyone have any ideas? 

Thanks,

Aaron

[N201MKTurbo]

13 minutes ago, Aaron Q said:

Guys,

I've been looking for dust boots PN 560070-001 for a couple of hours with no luck.  It looks like Lasar had a replacement part that is no longer available.  Does anyone have any ideas? 

Thanks,

Aaron

Get out the sewing machine….

[Q The Engineer]

19 minutes ago, N201MKTurbo said:

Get out the sewing machine….

Might have to.  Any idea on material? 

[N201MKTurbo]

9 minutes ago, Aaron Q said:

Might have to.  Any idea on material? 

I’d use this. I don’t know where to get the raw material. 
 

Aramid (Kevlar) should last forever. And it’s fireproof.

https://www.globalindustrial.com/p/18-kevlar-sleeve-with-thumb-slot-9378t?infoParam.campaignId=T9F&gclid=EAIaIQobChMI0ZCX9ZW0-wIVDhPUAR1RgwNkEAQYAyABEgKuZ_D_BwE

 

 

[gacoon]

1 hour ago, N201MKTurbo said:

I’d use this. I don’t know where to get the raw material. 
 

Aramid (Kevlar) should last forever. And it’s fireproof.

https://www.globalindustrial.com/p/18-kevlar-sleeve-with-thumb-slot-9378t?infoParam.campaignId=T9F&gclid=EAIaIQobChMI0ZCX9ZW0-wIVDhPUAR1RgwNkEAQYAyABEgKuZ_D_BwE

 

 

Theres probably enough material in one of those to make 1 dust boot

[Q The Engineer]

1 hour ago, N201MKTurbo said:

I’d use this. I don’t know where to get the raw material. 
 

Aramid (Kevlar) should last forever. And it’s fireproof.

https://www.globalindustrial.com/p/18-kevlar-sleeve-with-thumb-slot-9378t?infoParam.campaignId=T9F&gclid=EAIaIQobChMI0ZCX9ZW0-wIVDhPUAR1RgwNkEAQYAyABEgKuZ_D_BwE

 

 

Thanks!

[carusoam]

There may be someone else that makes them…

My M20C got one at the time the rug and sidewalls got updated…

Find the low cost rug and sidewall guy… and see if he makes the shifter boot to go with them…

There are a few threads around here discussing how to make this thing… and where to get one…

One challenging aspect… is the collection of height of rug and boot, getting in the way of the Johnson bar….  Trimming of the rug may be required…

PP thoughts only, 

-a-

[goodyFAB]

call lasar, they had them a month or two ago

[Fly Boomer]

On 11/16/2022 at 7:47 PM, Aaron Q said:

Guys,

I've been looking for dust boots PN 560070-001 for a couple of hours with no luck.  It looks like Lasar had a replacement part that is no longer available.  Does anyone have any ideas? 

Thanks,

Aaron

Word on the street is that Hector at AeroComfort makes them.

[Q The Engineer]

6 hours ago, Fly Boomer said:

Word on the street is that Hector at AeroComfort makes them.

Thanks very much! s

[Q The Engineer]

Found them at Lasar after quite a bit of searching.  I'm not sure why it was such a PITA to find but we're good now.  Thanks for the help guys. 

https://lasar.com/misc-supplies/rat-sock-l560070-001?utm_medium=email&utm_source=customer_notification