thomas1142 Posted July 18, 2022 Report Share Posted July 18, 2022 During a recent flight I got these two error messages. First leg of the flight the PTRIM lit up on the G3X but the GFC 500 continued operating normally. Trim was adjusting automatically, I could see the trim wheel moving. Second leg of the flight the TRIM UP or TRIM DOWN notification was displayed. I had to trim manually. Any ideas Thanks Quote Link to comment Share on other sites More sharing options...
ArtVandelay Posted July 18, 2022 Report Share Posted July 18, 2022 Another servo failure, check your serial number and look up an SB from Garmin. If you turn on logging (G3X), maybe you see more details of the errors. 1 Quote Link to comment Share on other sites More sharing options...
thomas1142 Posted July 18, 2022 Author Report Share Posted July 18, 2022 I replaced the Servo once about ten months after installation. I thought I might have escaped the latest round of faulty servos.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.