binkata Posted October 18, 2021 Report Posted October 18, 2021 Hi all, I went down to the hangar today to make some sun shades for blocking out heat when the plane is parked in hot locales, but in my sleep-deprived state I forgot that I had flown my K up to Ashland, OR (S03) to get two GI 275s installed....aaaaand I have no windows here to measure! Can anyone provide me with the rough outer dimensions of the windows? The plane will be up there for a few weeks (the upgrade will be immediately followed by the annual) and I'm hoping this little side project will keep me busy while I'm grounded. Thanks!
carusoam Posted October 18, 2021 Report Posted October 18, 2021 Hey binkata! Nice to see you back. While waiting for somebody with an M20K parked in their hangar down the hall…. If you have the POH handy… the drawings of the plane on the first few pages are to scale…. And some pretty good estimates can be made from there… Good luck with your next steps… Best regards, -a-
binkata Posted October 18, 2021 Author Report Posted October 18, 2021 That's a great idea, carusoam--thanks! I've been here to read the forums every now and then, but I don't have nearly enough knowledge or experience yet to contribute much to the discussions. But reading others' posts is always informative hangar talk (yours are always valuable). -sw 1
Recommended Posts