MisfitSELF Posted May 27, 2020 Report Share Posted May 27, 2020 Is there a site or forum that has links specifically to or for Mooney Parts? I know about the rocker switch covers and purchased one off Shapeways a couple of years ago but was hoping that there would be a "one stop" listing of things or model files that are available online from either Shapeways or Thingverse that are meant as simple Mooney replacement parts that could be 3D printed. I'm thinking that would be a good "sticky" for Mooneyspace. (of course standard disclaimers apply in terms of owner produced parts....yadda yadda yadda) 1 Quote Link to comment Share on other sites More sharing options...
carusoam Posted May 28, 2020 Report Share Posted May 28, 2020 Expect that we have a download section around here... This would be a good place for 3D printing files... Best regards, -a- Quote Link to comment Share on other sites More sharing options...
corn_flake Posted May 28, 2020 Report Share Posted May 28, 2020 I'll bite. It's not specific to Mooney, but it may be useful Prop Angle Gauge. Print them and buy a 3/4" square aluminum pipe from Home Depot. Attach to the prop and measure the angel. Prop Angle Gauge v2.stl 2 Quote Link to comment Share on other sites More sharing options...
MisfitSELF Posted May 29, 2020 Author Report Share Posted May 29, 2020 On 5/27/2020 at 6:43 PM, carusoam said: Expect that we have a download section around here... This would be a good place for 3D printing files... Best regards, -a- That's a good idea. The admins could add a category for 3d print files. Quote Link to comment Share on other sites More sharing options...
MisfitSELF Posted May 29, 2020 Author Report Share Posted May 29, 2020 On 5/27/2020 at 9:05 PM, corn_flake said: I'll bite. It's not specific to Mooney, but it may be useful Prop Angle Gauge. Print them and buy a 3/4" square aluminum pipe from Home Depot. Attach to the prop and measure the angel. Prop Angle Gauge v2.stl 2.62 kB · 2 downloads Now we need a version for control surface rigging! Could use the same setup perhaps? 3 Quote Link to comment Share on other sites More sharing options...
hmasing Posted March 29 Report Share Posted March 29 Necroposting to see if there is anyone else wanting this. I've seen 3D printed ceiling vent replacements, and I'd sure love the STL's or 3MF's for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.