Stephen Posted June 17, 2020 Report Posted June 17, 2020 I think I solved my issue....pending test flight. I replaces the probe with new unit...still 0 Fuel FJpi edm fuel flow has 3 wire molex connector to probe. With master on per Tim at JPI you should get 12v ish on red to black and 4-5 V on white to black with probe disconnected. I was getting 0 volts on white to black. I took off the P4 labled dinn connector and reseated it . I now shows 4.8V on white wire 12V on red and allso shows FF during priming. 1
oregon87 Posted June 17, 2020 Report Posted June 17, 2020 On 6/3/2020 at 11:16 AM, jetdriven said: the EI red cube is 80k something as well. The K-factor on our FT-60 "red cube" is 68000. 1
Recommended Posts