Neshi Posted May 8, 2020 Report Posted May 8, 2020 Can the G5 accept information from 2 nave sources. like a gnx375 for gps & a sl30 for nav?
oldguyscanfly Posted May 8, 2020 Report Posted May 8, 2020 My G5's accept nav data from my GNX375 and my GNC 255
AH-1 Cobra Pilot Posted May 8, 2020 Report Posted May 8, 2020 No. I just had a GNX-375 installed and had to add a G5 HSI. It does not accept input from my SL-30.
bradp Posted May 8, 2020 Report Posted May 8, 2020 No dual Nav sources for STC g5 unless there is a garmin autopilot and you remove your second CDI. SL-30 won’t work just because it lacks airinc out.
Neshi Posted May 8, 2020 Author Report Posted May 8, 2020 Thanks all. Sent from my iPhone using Tapatalk
Ragsf15e Posted May 9, 2020 Report Posted May 9, 2020 Ok, I don’t have the documentation in front of me, but I think it will accept 2 digital inputs... so not an old VOR, but an sl30 with a 430w should work. The AP wiring could affect that though.
bradp Posted May 10, 2020 Report Posted May 10, 2020 On 5/8/2020 at 5:10 PM, Paul_Havelka said: The SL30 will work with a G5 via rs232 I don't think the RS232 will provide vertical flag / vertical error outputs. I could be wrong; but I looked into this when I was upgrading my Nav2 and decided to go with a GNC255 (they were essentially the same price used).
Recommended Posts