Pasturepilot Posted July 26, 2019 Report Posted July 26, 2019 I usually hand it to Amy and say, "Here, hold this for a while." Looking for options, too.
Rwsavory Posted July 26, 2019 Report Posted July 26, 2019 I have been using a RAM yoke mount with Ipad cradle. https://www.rammount.com/consumer/in-air/airplane It puts the screen right in front of you.
gsxrpilot Posted July 26, 2019 Report Posted July 26, 2019 I've used every iPad mount conceivable including some I've made myself. I've got a box full of RAM parts I should put up for sale at some point. I've settled on the MYGOFLIGHT mount. It's expensive, but really well done and easy to use. I have the Adhesive Petal Base, Sport Mount Flex Clip, and the Mountable Case.
Ragsf15e Posted July 27, 2019 Report Posted July 27, 2019 Ram ball mount works really well for me, but I have a nice spot for it next to the JPI and the mount is built into the panel. I use a Mini. 1
tigers2007 Posted July 29, 2019 Report Posted July 29, 2019 +1 for the ball mount. I had to use the long arm to fit it this way. I can still use my Davtron clock. Sent from my iPhone using Tapatalk
MoonFlyer68 Posted July 29, 2019 Report Posted July 29, 2019 I sort of went the CB method for an iPad Mini mount and thought I could do better than some of the others out there. Even if I fail, it was a fun project. My plane is currently out of state getting work done but I have a spare yoke assembly at the house I could use as an example. This is just very light aluminum from Lowes and some small screws to hold it all together. My only concern is that it might sit high enough to block part of my instruments. Hopefully I will see over the top with no problem. This is version 1.0, so if there is a problem I will try 2.0. 1
Prior owner Posted July 30, 2019 Report Posted July 30, 2019 On 7/27/2019 at 3:19 PM, Ragsf15e said: Ram ball mount works really well for me, but I have a nice spot for it next to the JPI and the mount is built into the panel. I use a Mini. Not to hijack the thread, but MAN- your yokes look great... who covered the yokes?
Ragsf15e Posted July 30, 2019 Report Posted July 30, 2019 23 minutes ago, PilotCoyote said: Not to hijack the thread, but MAN- your yokes look great... who covered the yokes? Thanks! Pictures looking better than the real thing, but they aren’t bad. Not sure though, previous guy did a nice job with interior, autopilot, HSI, new panel, led lights, engine monitor, and interior. I just paid him pennies on the dollar for the effort.
carusoam Posted July 30, 2019 Report Posted July 30, 2019 Hmmmmm.... Seems like a topic that may have come up before... I wonder how many pages may have covered this question, recently... https://mooneyspace.com/search/?q="iPad mount"&updated_after=any&sortby=relevancy Enjoy, Loads of hardware and locations to choose from... Preferences are far from universal... Some people use more than one iPad... Some prefer different sized iPads for different functions... PP thoughts only, not a mechanic or CFI... Best regards, -a-
midlifeflyer Posted July 30, 2019 Report Posted July 30, 2019 I settled on a basic RAM yoke mount and Tab-Tite cradle. Except for planes without a yoke, like the DA-40, it works well in the various airplanes I fly.
Recommended Posts