All Activity

I had to do the contact cleaner twice on the 50 year old F model. Then it was the relay. The cool thing about the relay was there were two sides to it. So I just switched wires to the other side.

You have to take the one piece belly off. Normally im a fan of contact cleaner spray and deoxit, however, these switches are available and relatively cheap at the electrical supply places online. Mine had a dead spot and initially the contact cleaner worked, but only for a week and a couple flights. I had to take the belly off twice to eventually go back a replace the switch which I probably should’ve done the first time.

You are right about there being not more than a handful. There are probably far more consulting physicians than lawyers who are truly competent at this. Lawyers are better when the medical problem becomes a legal problem, but that's the thing we want to avoid if possible. But I agree - if it's important, get some professional advice. A good senior AME leading the way is worth their weight in gold, but we don't always have that.

The belly panel. It's all one. Oh and lube trim U joints and such. It probably does not need to be greased that often but every other time turns into never.

Agree. The contact cleaner you mention is ok. But the DeoxIT 5 is a superior product. Available on Amazon. I would hope the jack screw is greased at annual?? what access panel on a longbody gives access to the flap jackscrew?

Definitely don't sell your airplane or give up. Definitely do prepare for the very worst from the FAA Medical Branch and act proactively. If the process went smoothly for you without expert legal representation, you got very lucky. Like many if not most bureaucrats, the docs at the NTSB medical branch care much less about actual service than creating an appearance of usefulness - their priority is finding he path of least resistance to creating a facade of protecting public safety. Their fundamental laziness and indifference, which are the only things that would would make a licensed physician take that kinda job in the first place, also make them cave pretty easily when an astute attorney appears capable of creating extra work for them or exposing their rank incompetence before an NTSB judge. My message is not just that the NTSB Medical Branch is often capricious in its actions against pilots but also that they have vulnerabilities that provide a means to manage the serious threat they pose to your medical certificate. Also it is best to do everything possible to avoid the SI hellhole in the firstplace.

I am not an ageist. I have flown with a 80+ CFII (started flying at the end of WWII). Loved the guy. So much wisdom to impart. On occasions he flew in a questionable manner - no point in providing examples. It happens. Of course I see that in younger pilots - but not so much CFII.

I helped a buddy in buy a Cherokee 140 from them that had a freshly painted H-Stab. Turns out that the entire stab had several cracks. The cracks were bondo’d over and painted. Owner needed to buy a serviceable tail. Indy said sorry… -Matt

Well, as with any large, bureaucratic organization, it's hit or miss. My OSA SI, and a friend's SI for a stent, were relatively painless. Good experience with the AME that handled the process, reasonably prompt response from CAMI, requirements well-documented and evidence thereof accepted without further question. SI in-hand after a few weeks for me and a few months for my friend. There's no doubt others have bad experiences, and I'm sure one's likelihood of a good/bad experience varies from year to year as staff, administrators, and the executive branch change. But I also think it's important to give counterpoints to the sort of guaranteed-gloom-and-doom outlook other folks make here, because that sort of panic is exactly what leads people to conclude they have to sell their airplane and give up flying, when it's not actually the case. No quarrel from me about moving to BasicMed (or MOSAIC Sport pilot now) once a standard medical is obtained. But a subset of us want to preserve the legal right to offer paid ferry services, fly turbo Mooneys above 18,000, and so on.

Here is a pic.. -Don

Just have to stay in front of it. Nice stats!

My first cancer diagnosis prompted me to switch. I had a valid Class 2 with a special issuance for obstructive sleep apnea at the time so I immediately transitioned to BasicMed. This move preserved my ability to keep flying when my doc and I judged I met the requirements of paragraph 61.53, and never having to worry about a future Class 2 or 3 being denied or submitting to the ass pain associated with the recurring reporting and pile of documentation OKC requires. It was quite an easy decision and transition. I briefed my primary doc using the materials AOPA provides, answered a few questions she had and she was immediately on board. After surgery and adjuvant cancer treatment, a later bout with a different cancer that required surgery, and a total hip replacement, my doc and I are still making excellent informed decisions on when I am and am not good to fly without needing the okeedokee from a remote government official who has never seen me. I can't fly for hire anymore, but I'm fortunate to be retired and not in financial need. BTW, the score is Junkman - 2, Cancer - 0. I'm hoping that remains as a final score.

3m vinyl overlay that looks like carbon fiber… -Don

My PCP is a pilot, so that makes it a lot easier. Also my checkups mostly consist of us talking about aviation.

For the limit switches go to Wally world and get the red can of "Contact Cleaner" sometimes called "Electronics Cleaner" Spray vigorously into the switch while exorcising them. While you are there clean off the jack screw and apply new grease and run it in and out a couple of times. Probably has not been done since the plane left the factory. Same should work on your Stall Indicator on the wing. May need the little red tube to get inside the box and hopefully direct at the limit switch.

Once can and should write out a narrative for the clinician to document and sign if they are comfortable with its veracity. It's nice if someone with a medical background writes the narrative - I have personally done it for others in need. Also electronic medical records (e.g. Epic) do allow entry of edits and addenda well after the note is signed at the time of the visit - folks should not hesitate to ask for this to be done if necessary. It is also a very wise alternative to have one of the handful of lawyers nationally who are versed in aeromedical issues guide the clinician on the documentation the FAA wants to see. This approach costs money, but one should never leave anything to chance when dealing with the FAA Medical Branch - be as proactive as possible. They are not your friends - just lazy bureaucrats tasked creating a fake facade of protecting public safety.

By "overlay" do you mean a thin carbon fiber sheet that is glued or screwed to the underlying aluminum panel?

This is good stuff. I will try this process as you described. BTW, when I am exercising the autopilot in the hangar, I activate my electric standby vacuum pump to spin the attitude gyro. Thanks again.

Balance weights for an encore upgrade.

@Fly Boomer when using the up/down rocker switch you are putting in a hard pitch up/down command. The servo drive should start out slow and get slightly faster the longer you hold the up/down rocker. You will not see full speed due to the tach feedback that is sent back to the flight computer to govern the speed of the servo. The servo will continue to drive when using the up/down rocker switch until you tell it to stop, easiest way to stop the drive is to use the CWS switch or disconnect the system. The way I check auto trim functions is pull the yoke out to elevator neutral and engage the system. I apply pressure to the yoke by pushing or pulling on the yoke and wait 3-5 seconds to see if auto trim start to drive. Once it starts driving I remove the pressure and check to see if the trim servo stopped driving and then repeat the process in the opposite direction. Ideally this test should be done with the engine running and the attitude gyro spooled up unless you have glass indicators.

Thank you

BasicMed since returning to flying in 2021. No problems getting it. I get an annual physical from my PCP. Every other year I take a set of forms and he fills them out. I keep thinking I will do a consult with my local AME to get a 3rd or 2nd Class. But the only thing that would do for me is let me fly in the flight levels.

flying above FL180

Shop is finished with the carbon fiber overlay. Working on fitment now. Hardware is done, just the avionics side and new panel cutout is being worked on…

Any updates?