Igor_U Posted June 6 Report Posted June 6 (edited) 3 Ton Low Wing aircraft jacks by The Jack House inc. 24” tall to the top plate and 26” to the top of the Machined lifting surface, it is suitable for Mooney, Piper, Beechcraft and others. These jacks have locking Safety Collar Secures the Load for extended use, however Hydraulic cylinders are not leaking at all even after couple of weeks. Very stable with four leg design. Pickup at KPAE Paine field in Everett or Seattle. Price $500. Edited July 11 by Igor_U
Igor_U Posted June 17 Author Report Posted June 17 Hmm, 160 views and no response? No one needs the jack locally?
EricJ Posted June 17 Report Posted June 17 That's a screaming deal on some quality jacks. I'm surprised they haven't disappeared already.
201Mooniac Posted June 17 Report Posted June 17 Igor, I'd love to have them in my hangar but not sure how to get them from you. Adam 1
Hank Posted June 17 Report Posted June 17 1 hour ago, Igor_U said: Hmm, 160 views and no response? No one needs the jack locally? I'm a long, long way from Seattle . . . . Maybe 2-3 days' flying time in my C. That would make for an expensive set of jacks!
Igor_U Posted June 18 Author Report Posted June 18 15 hours ago, Hank said: I'm a long, long way from Seattle . . . . Maybe 2-3 days' flying time in my C. That would make for an expensive set of jacks! Yeah, but trip would be great. Well, I don't think these would fit in our planes. I got them from the Mooney owner years ago at 0S9 and had to drive to Olympic peninsula for that. That was then, now I don't even have good cars to transport them (we own 2 sedans) as the stand is wide and bulky. Thanks.
Igor_U Posted June 18 Author Report Posted June 18 17 hours ago, EricJ said: That's a screaming deal on some quality jacks. I'm surprised they haven't disappeared already. Thanks, that's the special price for Mooney owners. On the local Craigslist I ask for $600.
dkkim73 Posted June 18 Report Posted June 18 Do you know if there are any fit issues with a long body? Gear doors etc. Depending on how much of a hurry you are in, I'd be interested. That's a very reasonable price, appreciated! We're in the process of a household move this week (within MT) but at some point in the next couple months, I'm going to be bringing out a ground load from the Puget Sound area. Let me do some legwork and I'll PM you.
Igor_U Posted June 18 Author Report Posted June 18 @dkkim73 Hmm, I can't see any difference between mid and long body so i think fit should be the same. I used LASAR jack pads. I can wait as I will be leaving on vacation in a week and will move them home in Seattle. Thanks.
IvanP Posted June 28 Report Posted June 28 On 6/18/2025 at 3:13 PM, dkkim73 said: Do you know if there are any fit issues with a long body? Gear doors etc. Depending on how much of a hurry you are in, I'd be interested. That's a very reasonable price, appreciated! We're in the process of a household move this week (within MT) but at some point in the next couple months, I'm going to be bringing out a ground load from the Puget Sound area. Let me do some legwork and I'll PM you. These will work for long body just fine. I have the exact same set for my Bravo. I also use Alpha jack for the front hoist point on the engine mount.
hoot777 Posted June 30 Report Posted June 30 I’d love them but I’m in South Cacalacky. SC 10 mi s of kcae. Happy Fourth
Recommended Posts