Switch Cap Assembly and Base Plate on pilot control wheel for Bendix AP

[PierreL]

Hello,

I am looking for this 2 plastic parts :

Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost.

Any advice is welcome.

Many thanks.

 

Edited February 28 by PierreL

[IvanP]

Lasar used to have the cap assembly listed for cool $965.

https://lasar.com/switches/switch-cap-assy-cwsap-disconnect-trim-088-01091-0004 

I restored a cracked onel last year. Lasar currently indicates sold out, but if you reach out to the parts dept, Heather may be able to point you in the right direction. I hope you will be able to find it for a better price. It is a really flimsy piece of plastic that I cannot see would justify 1 AMU price tag. 

[Pinecone]

Hmm, if someone has the parts in good condition, I have a friend who can CAD them and make a 3D print file.

[LANCECASPER]

9 hours ago, PierreL said:

Hello,

I am looking for this 2 plastic parts :

Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost.

Any advice is welcome.

Many thanks.

 

This might work: https://www.thingiverse.com/thing:4340751

[PierreL]

Thank you for this CAD file that I previously seen on Mooneyspace.

The bendix trim screw holes don't correspond to the one I have. It might be adjusted.

I was just wondering if someone already had this 3D printed and how it looks like.

[Aerodon]

On 2/28/2025 at 8:48 AM, PierreL said:

Hello,

I am looking for this 2 plastic parts :

Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost.

Any advice is welcome.

Many thanks.

 

I have them for you, send me a PM.