Source for storm window latch

[Paul Thomas]

The latch to the storm window broke today; the small piece of plastic that rotates to keep the storm window closed. Does anyone know where I can order one or if there is a file to have it 3d printed?

Thanks,

Paul

[PT20J]

https://lasar.com/interior-hardware/vent-latch-917013-000

You might check other MSCs -- LASAR isn't always the cheapest. 

[Fly Boomer]

50 minutes ago, Paul Thomas said:

The latch to the storm window broke today; the small piece of plastic that rotates to keep the storm window closed. Does anyone know where I can order one or if there is a file to have it 3d printed?

Thanks,

Paul

Check this post

https://mooneyspace.com/topic/46117-vent-latch-3d-print

 

[varlajo]

55 minutes ago, Paul Thomas said:

The latch to the storm window broke today; the small piece of plastic that rotates to keep the storm window closed. Does anyone know where I can order one or if there is a file to have it 3d printed?

Thanks,

Paul

https://www.etsy.com/listing/1759892076/piper-pa28-pilot-storm-window-latch

Works very well for me.

Edited Saturday at 09:19 PM by varlajo

[N201MKTurbo]

I made one out of high grade birch plywood. It’s lovely. And my wife even likes the looks of it.

[Hank]

LASAR and GLAP come to mind. When I lost one of the two Chicago bolts out if mine, LASAR sent me a new set with four (4) much smaller bolts and insisted that was correct (it is for an Ovation).

Verify your bolt pattern before ordering, and check details on the latch, too; it's been before July 2019, so the details have faded, it may all be one big kit.

[PT20J]

Wow. So many options for a simple part. Were it so for some of the more complicated things!

[Paul Thomas]

Thank you all.

My neighbors bought their youngest a 3D printer. I'm going to have him print it; he's taking an entrepreneurial class so this project will fit right in and I'll learn more about 3D printing.