It's not a Mooney...But....Check it out!

[jclemens]

https://www.beechtalk.com/forums/viewtopic.php?f=21&t=153831

[Igor_U]

Need to be registered to see that...

[jclemens]

Sorry, here's a copy/paste:

 

We have been working on our company demo aircraft, a highly modified N35, for a bit now. I thought it was about time to post some photos documenting the build.  

The pre-existing avionics that are staying:

Garmin GMA35c Audio Panel
Garmin GTN 750 GPS/Nav/Com
Garmin GNC255A Nav/Com
Garmin GTX345 ADS-B Transponder
S-tec 55X Autopilot

Everything else is coming out and being replaced by:

Garmin G500 Txi 10.6" PFD w/ Synthetic Vision
Garmin EIS Txi Dedicated 7" Landscape EIS Display
MidContinent MD302 SAM for backup instrumentation

All of this is going in a trick new custom instrument panel. The panel started life as a blank from DeShannon Aviation. It was designed and cut in house on our Panel Pro 5925 CNC router built by Buller Enterprises. It is finished in a carbon fiber hydrographic and coated in clear CeraKote ceramic for durability. New reverse engraved circuit breaker and switch panel overlays, as well as placards were also manufactured in house utilizing the Panel Pro 5925.

And now for the photos....

[Bartman]

Very nice !  I really like the carbon fiber, especially the yoke

[steingar]

Crikey, that aircraft started out with a better panel than I've ever flown behind.

[kris_adams]

1 hour ago, steingar said:

Crikey, that aircraft started out with a better panel than I've ever flown behind.

Me too!

Jake: this looks amazing.  So what is the hole below the 10" screen?

[jclemens]

[MB65E]

That’s pretty slick! 

I’ve seen that process done with plastic trim on cars and rifel stocks.

But please stop it with the pictures, I have no money to give!

-Matt

[jclemens]

Just to be safe,I'll send a couple of my guys over to your hangar to check your pockets.....:)