Jerry Pressley Posted September 4, 2017 Report Posted September 4, 2017 anyone know how to "mist" acf 50 into the wings etc? too thick to use a garden sprayer. possibly to mix with something that will evaporate and leave the acf50? "mist" ascvf 50 into the wings etc?
kortopates Posted September 5, 2017 Report Posted September 5, 2017 I just recently did mine using ACF 50 and a Tricon sprayer. I went with the Tricon made for this because they also provide 5-6 foot wands that mist perfectly with their sprayer. Very affordable too. Sent from my iPhone using Tapatalk 1
Jerry Pressley Posted September 5, 2017 Author Report Posted September 5, 2017 Sorry to be so dumb but I pulled up tricon sprayer and they make loads of different ones. does yours look like a paint gun or gartden sorayer?
kortopates Posted September 5, 2017 Report Posted September 5, 2017 Sorry to be so dumb but I pulled up tricon sprayer and they make loads of different ones. does yours look like a paint gun or gartden sorayer? No problem, this one:http://www.triconsprayers.com/product/tri-con-atomized-sprayer-o-1800-1/ Sent from my iPhone using Tapatalk
Jerry Pressley Posted September 5, 2017 Author Report Posted September 5, 2017 thanks much mine is cleaned up after sitting for 25 years but needs this step. jerry
LANCECASPER Posted September 5, 2017 Report Posted September 5, 2017 Anything you do to keep it out of the autopilot servos?
kortopates Posted September 6, 2017 Report Posted September 6, 2017 Anything you do to keep it out of the autopilot servos? I covered mine with plastic bags and masking tape before spraying- then removed it the following day.Sent from my iPhone using Tapatalk 1
Recommended Posts