Cam lock screws

[Danb]

After landing today I noticed I lost screw on the cowling on my Bravo and don't have any left. It appears aircraft Spruce has them does anyone know the part number.

thanx

Dan

[FlyDave]

Dan,

My plane is in for annual right now and we'll be replacing some of mine on the cowling. I'll post the part number tomorrow afternoon when I have it.

Dave

[Danb]

Thanx Dave 

[Guest]

They should be 4002 series, the length or dash number should be engraved on the head of any of the surrounding ones on your cowl.

Clarence

[firefly201]

Dan,

Looks like you lost the snap on retaining ring and the stud. Having the right tool to replace them makes it a 2min job. Look at part# 4P3-1,

installation tool and part# T26,snap-on retaining ring tool. http://www.afsrcamloc.net/xua/downloads/4002 Series.pdf

[Guest]

Dan,

Now that I see the picture of the missing stud on the NACA duct, I see that it is not a 4002 stud but rather a 2700 series stud.

http://www.aircraftspruce.ca/catalog/hapages/camloc2700.php?clickkey=30310

The length of the stud is still on the head and you will need a AN960C516L washer on the outside and a 2600 SW retaining washer on the inside.

Clarence