dcrogers11 Posted February 10, 2016 Report Posted February 10, 2016 (edited) Does anyone have a part # for the gascolator gasket on a 64 M20C? Thanks, Don Edited February 10, 2016 by dcrogers11
1964-M20E Posted February 10, 2016 Report Posted February 10, 2016 http://www.brownaircraft.com/default.asp Go to Brown Aircraft Supply and ask for the GL-30-HD but cut from 1/16" thick material that is if it is the same one that is on the E and F models. the stock GL-30-HD is 2"O.D. x1/8" and is too thick. Brown is very reasonable on the price. Order 2 or 3 so you will be ready for the next annual as well.
dcrogers11 Posted February 10, 2016 Author Report Posted February 10, 2016 1 minute ago, 1964-M20E said: Thanks! Don http://www.brownaircraft.com/default.asp Go to Brown Aircraft Supply and ask for the GL-30-HD but cut from 1/16" thick material that is if it is the same one that is on the E and F models. the stock GL-30-HD is 2"O.D. x1/8" and is too thick. Brown is very reasonable on the price. Order 2 or 3 so you will be ready for the next annual as well.
MB65E Posted February 10, 2016 Report Posted February 10, 2016 Dan at lasar will have them too. Maybe Browns price is better than lasar's. $35 at lasar... -Matt
Yetti Posted February 10, 2016 Report Posted February 10, 2016 I had saved this link. http://www.brownaircraft.com/product_p/gl-30-hd.htm But I guess thinner?
1964-M20E Posted February 11, 2016 Report Posted February 11, 2016 13 hours ago, MB65E said: Dan at lasar will have them too. Maybe Browns price is better than lasar's. $35 at lasar... -Matt Much cheaper around $10+/-
1964-M20E Posted February 11, 2016 Report Posted February 11, 2016 13 hours ago, Yetti said: I had saved this link. http://www.brownaircraft.com/product_p/gl-30-hd.htm But I guess thinner? Yes you need to ask them to cut it from 1/16" material.
moodychief Posted February 12, 2016 Report Posted February 12, 2016 You didn't hear it from me but I was once told it is the same one used on the early 60s John Deere tractors.
Recommended Posts