dlmorris Posted February 8, 2016 Report Posted February 8, 2016 Recently, I've experienced an "high fuel pressure" warning (red) on the MVP-50 installed in our K Model 262. Reviewing the original programming setup doesn't indicate what constitutes "high" fuel pressure. The setup was carried over from a prior EI FP5. The POH for the engine doesn't even mention fuel pressure. Anyone know what the high-low limitations are? Sent from my iPad using Tapatalk
jackn Posted February 8, 2016 Report Posted February 8, 2016 SID97-3F gives the numbers. For a TSIO-360MB its 13.6-15.3 psi.
kortopates Posted February 8, 2016 Report Posted February 8, 2016 Jack is correct, but last fall it was updated to the G version.
Recommended Posts