worloski Posted May 5, 2015 Report Posted May 5, 2015 Hey gang, I am a new mooney M20j 205 owner. I took it in to upgrade the avionics and to get the gross weight increase done. When I went to pick it up I tested the controls. When the plane nose gear is straight the yoke will spring back to neutral when turned to the right but not spring back when turned to the left. If you turn the nose wheel to the right the controls are equal both ways. Is this normal? The shop did pull the rudder to balance it for the gross weight increase. They also resealed the tanks. Any suggestions to what would cause this or is it normal? Quote
N201MKTurbo Posted May 5, 2015 Report Posted May 5, 2015 One of the interconnect springs in the belly may have come off. Quote
Guest Posted May 5, 2015 Report Posted May 5, 2015 It is possible that if they pulled your plane with a large tug, they may have over steered the nose gear. Have it inspected for damage to the nose truss. Clarence Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.