Free to good home

[mjc]

I found two items left in my garage that I can't use anymore; perhaps soomeone here will find them useful:

- Davtron M800M clock faceplate: this is the faceplate that converts the Davtron M800 panel-mount clock to mount in a older Mooney yoke... you will have to supply your own M800 clock

- Bag of 66-105 brake linings and rivets

 

If you can use one of these, PM me an address and I'll send each to the first person to PM about one. (It may take me a few days to get them out, please be patient.)

 

[Skypylott]

I can use the brake linings and if no one else need it I will put the M800 face plate to use and install an M800 in my Mustang. 

                                                                                 Thanks

                                                                                    Tom

                                                                 Granite Mountain Aviation, L.L.C.

                                                                 6543 Crystal Lane

                                                                 Prescott, Arizona 86301

                                                                 928-443-8509   

[1964-M20E]

I can use the face plate I have a M800 that is lonely and needs to be installed. PM sent

[mjc]

Brake linings have been sent to Tom and the faceplate to John. Just to clarify, I don't want any payment for shipping or anything. Just please use the items.

[1964-M20E]

MJC

Thanks for sending out the Davtron cover plate. However, my M800-14V will not fit the M800M cover plate I even disassembled my M800 thinking that would work and no go.   It is a real nice cover much better than what I made myslef.

 

 

So Tom if you are still interested in the M800M I'll send it to you?

 

Otherwise I'll send it on to whoever else can use it.

[mjc]

You should give Davtron a call, they may be able to tell you if something needs to be modified. They're the ones who sold me the "regular" M800 faceplate to replace the M800M faceplate, and they told me at that time it was the same clock.

[1964-M20E]

OK thanks I'll try again.