Jump to content

SheryLoewen

Verified Member
 View Profile  See their activity

  • Posts

    87

  • Joined

  • Last visited

 Content Type 

Everything posted by SheryLoewen

  1. SheryLoewen
    Item #3 210026-022 Cap lower Loewens Mooney salvage may have a used one with rivet holes . Paul Loewen
  2. SheryLoewen
    The LASAR 201 windshield mod has good access over an under, as much of the extra metal is removed. SWTA puts the windshield right over the existing structure and needs the little access openings. Paul L. -------Loewen's Mooney Salvage
  3. SheryLoewen
    LASAR STC DWG # 127 is what you need for IO-360 upgrade Paul Loewen
  4. SheryLoewen
    Service Bulletin SBM20-177
  5. SheryLoewen
    Seen this before--- when you relax the key the right mag un-grounds and you may get a start. You can disable the stater by removing the + cable and listen for the SOS. Paul Loewen
  6. SheryLoewen
    Early M20K's had this tank as a fuel return from the Fuel injector. OEM Mooney system. Paul Loewen
  7. SheryLoewen
    LASAR parts has PMA on these.
  8. SheryLoewen
    pilot’s side control yoke and shaft. Loewens Mooney salvage has both Paul L.
  9. SheryLoewen
    I have some of each kind available or can rebuild the sliders. Paul---Loewens Mooney Salvage
  10. SheryLoewen
    adjusting screws are 10-32 Mooney Service instruction might help?? SI M20-41-1 Paul L.
  11. SheryLoewen
    The LASAR Rebuilt Steering Horn Exchange and SB202 and Shock disc will give you a fresh start. Check the anchor bolt into the airframe (top) too. Paul
  12. SheryLoewen
    I have one, new surplus, late style.and bunch of components. Loewen's Mooney Salvage Paul
  13. SheryLoewen
    I estimate about 5 hrs per window considereing you are removing and reinstalling he interior only once. Trim with a bandsaw and sand the edges smooth. Paul L.
  14. SheryLoewen
    It needs a lot of fuel boast and mixture in when cranking Paul L
  15. SheryLoewen
    Paul here, I designed them at LASAR. Its a matter of shimming and adjustment. The are square standoffs or "U" shape brackets for mounting to the axle Paul
  16. SheryLoewen
    We checked our stock for a gear cable, but we didn't find one. Paul Loewen ---LMS
  17. SheryLoewen
    LMS--Loewens Mooney Salvage may have one in a 1969 M20G $190 + mailing--- let me know. Paul
  18. SheryLoewen

    IMG_2773.thumb.JPG.1bbedcd066ce8a7f0a1a2b4aa42eca39.JPGIMG_2772.thumb.JPG.e90ec3d5439e84abb054131aaa715903.JPG@01 style  $45 each plus mailing

    paull@sonic.net

  19. SheryLoewen
    Look like this?? Paul ---LMS
  20. SheryLoewen
    Loewens Mooney Salvage has some good used servos' Paul--LMS
  21. SheryLoewen
    The latching system is adjustable and the inside door handle will snap "overcenter" (forward) when properly adjusted. I have sometimes closed the hook some on the latch with some channel lock pliers , to more positively grab the vertical pin. Paul
  22. SheryLoewen
    Co copilot control wheel $175 Loewen's Mooney salvage
  23. SheryLoewen
    It's definitely starting on he Right Mag as you release the switch, so something is amiss with the left mag or switch wiring. --seen this before-- Paul Loewen
  24. SheryLoewen
  25. SheryLoewen
    Be sure that the doors overlap..The flat outer door over the inner door----.if they don't it could jam the gear up.13) With the gear in the up position, place the new gear door so that it is overlapped by the outer door and is square with respect to the direction of flight. On some installations it may be necessary to trim the edge of the door adjacent to the brake caliper and tire. Paul
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.