Jump to content

Recommended Posts

Posted

When I installed a vertical card compass to replace the factory compass, I had to reshape the visor ends to fit. It turned out to be easier to just fashion new visors out of a sheet of tinted acrylic.  I used a band saw with a fine-tooth band to cut the acrylic, and used a finishing file for the edges.  But of course I had the brackets and screws; if you don't have them I'm sure you can find them used.  Photo of the acrylic sheet I purchased is about 4-5 years old.

replacementvisors.jpg.dc2b9ea21cf1abb00166ecdf39a92ac9.jpg

Acrylic sheet for Mooney visors.JPG

Posted
9 hours ago, billy hellcat said:

I need some sun visors. Mine didn’t have any. 1968 m20C with j model windshield. Any options besides Rosen?

You might consider changing your profile to show what airplane you’re flying now.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.