JohnMooney66 Posted August 29 Report Posted August 29 Performing an annual and found the forward bulkhead of the prop spinner shattered. Looking for a replacement. P/n C-3532-22P. Any help would be much appreciated. South Louisiana
takair Posted August 31 Report Posted August 31 I suspect yours is not stock. Do you have a cowl mod on there? Stock spinner does not have bulkhead. I know Tyler had one from an F, but suspect it is different part number. @Flyler
Yetti Posted September 1 Report Posted September 1 is that a Hartzell? I have several spinners with bulk heads attached with screws.
Flyler Posted September 1 Report Posted September 1 Unfortunately mine does not have a part number that I could find. I assume it's for the factory 2 blade McCauley, but it does not have a bulkhead.
JohnMooney66 Posted September 1 Author Report Posted September 1 10 hours ago, takair said: I suspect yours is not stock. Do you have a cowl mod on there? Stock spinner does not have bulkhead. I know Tyler had one from an F, but suspect it is different part number. @Flyler Affirmative! It is not stock a former mechanic removed the stock one after the aft bulkhead cracked and installed this one, yes cowl mod was done as well!
JohnMooney66 Posted September 1 Author Report Posted September 1 4 minutes ago, Flyler said: Unfortunately mine does not have a part number that I could find. I assume it's for the factory 2 blade McCauley, but it does not have a bulkhead. So you have the F model spinner without a bulkhead?
JohnMooney66 Posted September 1 Author Report Posted September 1 1 hour ago, Yetti said: is that a Hartzell? I have several spinners with bulk heads attached with screws. Yes it is Hartzell and I wouldn’t know how to find out if that bulkhead difference would be legal for my application. If anyone knows that’d help
Flyler Posted September 1 Report Posted September 1 Yes, just the spinner. It is in my hangar but if you're in need I can take some measurements and pictures. I don't know much about it. I'm a bit too tired to make this statement more eloquent- I bought the plane from a dead guys brother. It had the SWTA cowl and spinner on it, came with what appears to be the factory spinner in the back seat. I promptly totalled the plane after purchasing it. Still have the original spinner.
Yetti Posted September 1 Report Posted September 1 Two different spinners parts numbers. Have a third spinner with no part numbers. Off an E model.
Dick Denenny Posted September 2 Report Posted September 2 I have a spinner off of my E Ser. # 930 that I just replaced. I'm out of town for another week but will check and get back to you when I return. It had a small crack that we drill-stopped a few years ago and seemed fine. Dick
Flyler Posted September 8 Report Posted September 8 I stopped by the hangar and took some pictures of the one I have. I saw that two holes appear to have a crack. I could not see any part number. 1
Dick Denenny Posted September 9 Report Posted September 9 Just let me know if you want them. I could ship them to you and see if they work 1
JohnMooney66 Posted Friday at 04:27 AM Author Report Posted Friday at 04:27 AM On 9/8/2025 at 7:47 PM, Dick Denenny said: Just let me know if you want them. I could ship them to you and see if they work That looks like the right parts I pm’d you!
Rmfriday Posted Sunday at 01:50 PM Report Posted Sunday at 01:50 PM The cowl mod STC should have the part # for the spinner you have/need. it looks like you have the SWTA? Cowl mod and it does call out the snippet you need w that mod/stc
Dick Denenny Posted Sunday at 07:34 PM Report Posted Sunday at 07:34 PM I really don't mind spending a few shipping $s to get it to you to see if it works. For whatever reason there are no parts number on anything. Let me know and I'll work with you. DD 1
JohnMooney66 Posted Tuesday at 05:16 PM Author Report Posted Tuesday at 05:16 PM On 9/14/2025 at 2:34 PM, Dick Denenny said: I really don't mind spending a few shipping $s to get it to you to see if it works. For whatever reason there are no parts number on anything. Let me know and I'll work with you. DD I messaged you the address and my cell if you could text/call me
Dick Denenny Posted 11 hours ago Report Posted 11 hours ago 23 hours ago, JohnMooney66 said: I messaged you the address and my cell if you could text/call me I haven't recieved a thing from you. Dick
Recommended Posts