Matt Ward Posted April 18, 2020 Report Posted April 18, 2020 I'm just into owning my first Mooney and I'm hearing that I need to replace my donuts. The donuts appear to indicate a manufacturing date of April 1998 by the "4 98" on them. That would make sense as I have a logbook entry on 8/21/98 (2563 tach hours ago) that says "landing gear shock discs (all)". Before I spend a lot of money on doing this, are there conditions I should be aware of? I did a bit of searching on the donut replacement and it sound like old donuts are often accompanied by problems steering. I've not noticed that at all. There doesn't seem to be a lot of visible evidence (to me) of major cracking/wear. What condition should I be looking for as I consider replacing them? Or, is it simply a time-of-life issue? Thanks! Quote
Ross Taylor Posted April 18, 2020 Report Posted April 18, 2020 Hi Matt, here's some good info on that: https://lasar.com/mooney-shock-disc-replacement-and-nose-gear-wear-and-tear I'm certainly no expert, but I did find that write-up informative. Congrats on the E! Quote
carusoam Posted April 18, 2020 Report Posted April 18, 2020 Matt, What were you listening to when you heard the donuts need replacement? There are a few threads around here that cover donuts and several quirky side stories... The short story... There is actually a procedure in the maintenance manual to follow... a simple measurement of compression... Over time the donuts compress, and just don’t come back...all the way. Short body donuts last longer than long body donuts... same donut, just a few more pounds of compression... 20 years is a long time... Realistically, the date of manufacture can be misleading... It is time under compression that wears them out... average temperature while under load will help them compress faster... Read through your airframe log to find out when the were swapped in...that will give the real feel for how old they are... Read through the MM to see how to measure the compression... Search for donut pics around here... a few owners have put new stacks next to old stacks... Some stacks are really ugly... Get ready to see what else can go wrong... some times the tube the DuPont mount on can get damaged... by rust... To start... your donuts look nice... they aren’t aged, cracked, or painted over... New donuts are really cool... comfy when taxiing over cracked pavement... PP thoughts only, not a mechanic... Best regards, -a- Quote
Matt Ward Posted April 18, 2020 Author Report Posted April 18, 2020 Thanks for that. FWIW, I have manual gear and not electric. It seems like the gear retraction issue would be relevant to electrics, wouldn’t it? The leaky fuel tanks seems notable. That’s not a problem for me now but good to know! The article didn’t explicitly mention a way to measure these, any insight on that? Quote
Matt Ward Posted April 18, 2020 Author Report Posted April 18, 2020 Thanks @carusoam I saw those threads too. Those donuts appeared much worse! I’ll search out the MM as you suggested. The reco was from an A&P estimating my first annual. Quote
RLCarter Posted April 18, 2020 Report Posted April 18, 2020 (edited) 10 minutes ago, Matt Ward said: Thanks for that. FWIW, I have manual gear and not electric. It seems like the gear retraction issue would be relevant to electrics, wouldn’t it? The leaky fuel tanks seems notable. That’s not a problem for me now but good to know! The article didn’t explicitly mention a way to measure these, any insight on that? the procedure for measuring is in the Maintinace Manual, it's available in the download area, if not I can email it to you Edited April 18, 2020 by RLCarter Quote
carusoam Posted April 18, 2020 Report Posted April 18, 2020 Worn metal parts are causes of steering issues... worn donuts are not noticeable by anything other their ability to absorb jolts... The more compressed they get, the less they absorb jolts... Use the search function for changing out donuts... tools needed or not needed... lots of pics... Find a parts manual... find a maintenance manual... They should all be around here somewhere... When that doesn’t work, your local MSC should be able to get you an electronic copy... Best regards, -a- 1 Quote
N201MKTurbo Posted April 18, 2020 Report Posted April 18, 2020 I just replaced mine last year. They finally failed the gap test. They had a date code of 7-77. They were the originals. If you jack the plane and the doughnuts don't fill the gap, they need to be replaced. Contrary to a lot of other peoples results, I didn't really notice a difference in the ride after I replaced them. It might be because it is hot here, they behave better when it is hot. Quote
Matt Ward Posted April 18, 2020 Author Report Posted April 18, 2020 (edited) Thanks. I found the below in the MM. It says I need the plane on jacks. Were you guys thinking of another way? Edited April 18, 2020 by Matt Ward Quote
carusoam Posted April 18, 2020 Report Posted April 18, 2020 Following the MM is the best way to not be a test mechanic... As imperfect as the manuals, procedures and drawings are... Jacking the plane up allows things to hang with gravity opening up all the available space... The donuts will expand to fill some of the space... The measuring is done under that set of conditions... Done exactly like the book says is a go / NoGo type gauge... realistically, the donuts compress slowly over decades... so it’s not like they just broke and need to be fixed immediately... annuals and pre purchase inspections usually take this measurement into consideration... 1 amu for donuts keeps us from wanting to do this often... Got anything else in mind? Somebody was selling a set of jacks around here recently... Best regards, -a- Quote
cliffy Posted April 18, 2020 Report Posted April 18, 2020 If you do put it up on jacks take a look at the "free play" left and right of the nose gear. More than 3 to 5 degrees of twist is time to fix the wear in the nose gear steering linkage up in the top of the nose wheel well. If you look up there while twisting the nose gear you'll see how worn the parts can get. Makes a BIG difference on landing Look up "The 8 Second Ride) by Don Maxwell What the heck I looked it up for you http://donmaxwell.com/the-eight-second-ride-sb-m20-202/ Quote
Matt Ward Posted April 18, 2020 Author Report Posted April 18, 2020 Thanks everybody. FWIW, in 2013 the plane did have the LASAR nose gear truss oversize bushing service kit installed. I'll check the track this morning and look for any free play. Quote
philiplane Posted April 18, 2020 Report Posted April 18, 2020 (edited) Rubber products simply aren't designed, or able, to retain their original properties for more than 10 years. And 22 years in service? Just replace them. This goes for everything. Hoses, door gaskets, engine isolators, etc. Show someone a 22 year old shock disc that costs $5, and he'll replace it without question. Heck, it's a 22 year old rubber part! Toss it! Show someone a 22 year old shock disc that costs $110, and he'll try to justify keeping it in service awhile longer...to the detriment of the landing gear system and everything riding on it. Edited April 18, 2020 by philiplane 5 Quote
Matt_AZ Posted April 18, 2020 Report Posted April 18, 2020 Mine were replaced all around at annual a few weeks ago. The date code was 1998 so I’m sure they were due. My landings have been smoother but I’ve noticed a little bouncier. You can rent the tools from Lasar & they are not too difficult to replace. Quote
MooneyMitch Posted April 18, 2020 Report Posted April 18, 2020 If it weren’t for Al Mooney choosing International Harvester rubber donut engine mounts to put on the M18 gear legs, they might not have migrated into the M20’s..... Quote
carusoam Posted April 18, 2020 Report Posted April 18, 2020 M18 Mite owners would love to have a part number for the IH mounts... there seems to be a shortage of replacements for them... Best regards, -a- Quote
MooneyMitch Posted April 18, 2020 Report Posted April 18, 2020 Hmmmm..... I believe it was dear Mr. Terrible (Bill Wheat) himself that told me the original donuts on the M18 were from IH tractor engine mounts, along with some other tractor parts incorporated into the Mites. I’m sure the Mite folks know a lot more about the donuts, and lack thereof, than myself. 1 Quote
carusoam Posted April 18, 2020 Report Posted April 18, 2020 The Mite section of MS has been on the look out... I thought they were from a Mack Truck for some reason... Best regards, -a- 1 Quote
MooneyMitch Posted April 18, 2020 Report Posted April 18, 2020 I could be wrong...... I was wrong once before, I think, but I really don’t remember!! Quote
HRM Posted April 19, 2020 Report Posted April 19, 2020 I had the same issue with my E. Very, very old discs. A&P said, "Time to think about replacing." Did so and the handling and landing improvements were noticeable. Old discs were hard as rocks. I still have them. Quote
Guest Posted April 19, 2020 Report Posted April 19, 2020 13 hours ago, carusoam said: M18 Mite owners would love to have a part number for the IH mounts... there seems to be a shortage of replacements for them... Best regards, -a- They’re as rare as unicorns and when available sold for $1000 for 6 of them. Clarence Quote
RLCarter Posted April 19, 2020 Report Posted April 19, 2020 16 hours ago, carusoam said: I thought they were from a Mack Truck for some reason... I seem to remember reading the ones for the M20's were from Mack trucks. I had to replace mine which were original, meaning "Mo Money", Dan at LASAR hooked me up with new Disks, Shock Links, Collars, Bushings and Hardware Quote
Skydancer2992 Posted April 20, 2020 Report Posted April 20, 2020 What's interesting is that Vans aircraft sells the Lord Shock Discs as they are part of the nose gear system of their kit planes.https://www.vansaircraft.com/wp-content/uploads/2019/01/RV-14_40A.pdf 1 Quote
carusoam Posted April 21, 2020 Report Posted April 21, 2020 Welcome aboard Skyd. Lord sells a bunch of rubber parts to the industry... Trying to figure out which ones are the right size for the Mooney isn’t very difficult... Getting them for a lower price than $105 each, is the challenge... We need 11 of them for the whole plane... Are the Vans people using the same dimensions as the Mooney? PP thoughts and wonderment... trying to find a better solution... Best regards, -a- 1 Quote
Matt Ward Posted April 21, 2020 Author Report Posted April 21, 2020 Very interesting! The part number looks a little different. Are they compatible? And any less expensive? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.