Jump to content

Recommended Posts

Posted (edited)
1 hour ago, McMooney said:

My E is the same way

thinking about asking my ia/ap to come up with something to close the gap

Like two large scoops grabbing air on the high pressure side.  Can't be good.  Looks like mine were shortened looking in the parts manual they look like they have a version that closes the gap

Edited by Grandmas Flying Couch
Posted

Over the years I think they get bent and don't fit as well as they should. Over the years I have "tweaked" mine to fit better,

Posted

Looks like a lot of room for improvement there...

Any idea what the two holes are for on it’s leading edge?  Looks like something used to be attached...

An Easy research project... walk down the ramp looking at any more modern Mooney or another one with the same flap hinge covers to see what gets added in there...

Expect something can close over the open space and still allow the proper flap movement...

At 150kias there is probably a bit of force on that...

Best regards,

-a-

Posted
6 minutes ago, carusoam said:

Looks like a lot of room for improvement there...

Any idea what the two holes are for on it’s leading edge?  Looks like something used to be attached...

An Easy research project... walk down the ramp looking at any more modern Mooney or another one with the same flap hinge covers to see what gets added in there...

Expect something can close over the open space and still allow the proper flap movement...

At 150kias there is probably a bit of force on that...

Best regards,

-a-

Lol, I don't know why I didn't think of walking down the ramp!  I kept trying to find pics online.  There are a few at my KGYR home base.  I'll have to sneak a peak under some of the ladies at the T-Shades, after that I'll have to find a Mooney and find what covers that gap.  Thanks!  

  • Like 2
Posted
7 minutes ago, Ragsf15e said:

Mine look just about exactly the same (1968 F) If you cover them up and gain 10kts, please post about it!

I noticed variations in those wing panels I may buy the other variant, ensure it doesn't get close to the flaps and install them since they are listed in the parts manual.  I also will loosen the hardware and see if I can tweak it so the end of the gap is higher than the leading edge of the hole.  

Posted
22 hours ago, Jeph357 said:

thumbnail.thumb.jpeg.d9486932d1256f6222004d77f2ab5898.jpeg

Here is Fairing 310220-008 installed on my E

Heres the first 

I'm looking for a used set, definitely looks better.  Thanks!  With 3 or 4 hours of messing around will probably pick up 1-3 kts.  So far we have gotten the plane from 140 kts true to 148 to 150 true.  She was flying sideways when I got her.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.