NicoN Posted June 11, 2018 Report Posted June 11, 2018 We have some lights under the glare-shield which do not work. Some bulbs are blown - which kind are these exact? They look like T1 3/4 SOckets. Also there are Eyebrow-caps which are screwed in. I know only those which are only push-in and can be pulled out simply
Eraaen Posted June 12, 2018 Report Posted June 12, 2018 I'm sorry, I don't have time to look right now. Gott'a run out. But if you search on my posts from a while back, you will see pics of both the bulbs and screw in caps that one of these nice guys gave me a part number for.
Eraaen Posted June 12, 2018 Report Posted June 12, 2018 On 2015/11/10 at 5:07 PM, Eraaen said: I had a dash light burn out (So I thought) I actually had a bulb and this strange cap fall out of the glare shield (of course I can't find them) I spent an hour with a parts guy looking through a parts catalog. Does anyone know the part number for this cap? I could be either 130285-003 a receptacle or 130285-001 a holder. It is a 330 bulb. I need two of each.
Eraaen Posted June 12, 2018 Report Posted June 12, 2018 On 2015/11/10 at 5:07 PM, Eraaen said: According to Don Maxwell these are 130285-003 and about $43 each from mooney.
Piloto Posted June 13, 2018 Report Posted June 13, 2018 (edited) 7 hours ago, Eraaen said: According to Don Maxwell these are 130285-003 and about $43 each from mooney. $43 dollars, get a flashlight. Edited June 13, 2018 by Piloto 1
NicoN Posted June 13, 2018 Author Report Posted June 13, 2018 (edited) Seems that you get the complete package (socket and screw-in "inlay") for the Money. Great. Thank you for all the answers. Edited June 13, 2018 by NicoN
Piloto Posted June 14, 2018 Report Posted June 14, 2018 Incandescent lightbulbs have a short life on small piston planes due to vibration. When the lightbulb is on the filament becomes hot and less rigid easy to break under vibration. Specially with incandescent landing lights. This does not occur with LED lights. José
NicoN Posted June 23, 2018 Author Report Posted June 23, 2018 Thanky you. I have found two of the screw-in caps in a box with parts. For now the glare-shield-lighting is complete and all bulbs are lit. I think, the next step can be replacing the light-bulbs with LEDs
Recommended Posts