Jump to content

Recommended Posts

Posted

I apparently don't know my own strength and snapped the flap lever cable in the retract position so I can't pump the flaps down.  The lever has been stiff to operate but I broke it good now.  Any ideas where to get one??? 

Posted (edited)

Your best bet is to cut the wire at the flap pump and pull it all out with a pair of vice grips. Work it in and out with some oil until it works well. Then go to McMaster Carr and order a length of piano wire the same diameter and replace the center. That will give it another 20 years or so. Especially if you keep it lubed this time. 

Replacing the whole thing isn't all that hard. It is standard Bowden cable that you can get from Spruce or McFarlane.

http://www.aircraftspruce.com/catalog/appages/bowdencable.php

Edited by N201MKTurbo
  • Like 3
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.